The Generation of Dual Wavelength Pulse Fiber Laser Using Fiber Bragg Grating

Authors

  • Fatin Shaqira Abdul Hadi Universiti Tun Hussein Onn Malaysia
  • Zahariah Zakaria Universiti Tun Hussein Onn Malaysia
  • Noor Azura Awang Universiti Tun Hussein Onn Malaysia
  • Atiqah Nabieha Azmi Universiti Tun Hussein Onn Malaysia

Keywords:

Dual wavelength pulse fiber laser, fiber Bragg gratings, pulse spacing, repetition rate, signal to noise ratio

Abstract

A stable simple generation of dual wavelength pulse fiber laser on experimental method is proposed and demonstrated by using Figure eight circuit diagram. The generation of dual wavelength pulse fiber laser was proposed using fiber Bragg gratings (FBGs) with two different central wavelengths which are 1550 nm and 1560 nm. At 600 mA (27.78 dBm) of laser diode, the stability of dual wavelength pulse fiber laser appears on 1550 nm and 1560 nm with the respective peak powers of -54.03 dBm and -58.00 dBm. The wavelength spacing of the spectrum is about 10 nm while the signal noise to ratio (SNR) for both peaks are about 8.23 dBm and 9.67 dBm. In addition, the repetition rate is 2.878 MHz with corresponding pulse spacing of about 0.5 µs, is recorded.

Downloads

Download data is not yet available.

Downloads

Published

28-12-2017

How to Cite

Abdul Hadi, F. S., Zakaria, Z., Awang, N. A., & Azmi, A. N. (2017). The Generation of Dual Wavelength Pulse Fiber Laser Using Fiber Bragg Grating. Journal of Science and Technology, 9(3). https://penerbit.uthm.edu.my/ojs/index.php/JST/article/view/2064

Most read articles by the same author(s)