Development of Single Phase Back to Back Converter with Closed Loop Voltage Feedback Controlled by Arduino Microcontroller
Keywords:
back to back converter, Arduino, Matlab, voltage controlAbstract
This paper presents a development of single phase back to back converter using voltage closed loop feedback using Arduino microcontroller. The key feature of this system is the ability of the Arduino as a low microcontroller to control the gate signal of power switches of the inverter by referring to the target voltage when applying with the PI control. The Matlab-Simulink has been the communication medium between software and the microcontroller. This is because, the controller structures have been developed based on the control mathematical formulae before downloaded to the microcontroller in order to test the back to back converter. Based on the results obtained, the back to back converter has successfully responded to the voltage feedback control mechanism and the Arduino is operated as a suitable low cost microcontroller for gate firing signalsDownloads
Download data is not yet available.
Downloads
Published
01-04-2016
Issue
Section
Issue on Electrical and Electronic Engineering
License
Open access licenses
Open Access is by licensing the content with a Creative Commons (CC) license.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
How to Cite
Zulkifi, S. A., & Zakaria, M. Z. (2016). Development of Single Phase Back to Back Converter with Closed Loop Voltage Feedback Controlled by Arduino Microcontroller. International Journal of Integrated Engineering, 8(1). https://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/1327