Dual Band Antenna for Wi-Fi and 5G Communication

Authors

  • Maizatul Alice Meor Said Centre for Telecommunication Research & Innovation (CeTRI), Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia
  • Mohamad Harris Misran Centre for Telecommunication Research & Innovation (CeTRI), Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia
  • Mohd Azlishah Othman Centre for Telecommunication Research & Innovation (CeTRI), Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia
  • Abd Shukur Jaafar Centre for Telecommunication Research & Innovation (CeTRI), Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia
  • Redzuan Abd Manap Centre for Telecommunication Research & Innovation (CeTRI), Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer (FKEKK), Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia
  • Shadia Suhaimi Faculty of Business, Multimedia University, Jalan Ayer Keroh Lama, 75450 Bukit Beruang, Melaka, Malaysia
  • Nurmala Irdawaty Hassan Electrical & Electronic Engineering Programme, School of Engineering and Physical Sciences, Heriot-Watt University Malaysia, No. 1, Jalan Venna P5/2, Precinct 5, 62200 Putrajaya, Malaysia

Keywords:

5G, Microstrip Antenna, dual band

Abstract

The objective of this project is to design a microstrip antenna that operates in both the Wi-Fi and 5G frequency bands, specifically at 2.4GHz for Wi-Fi and 3.5GHz for 5G communication. The antenna design pattern on a FR4 substrate has been selected to be a rectangular microstrip patch antenna due of its low-profile form. The square patch antenna incorporates slot and inset feed techniques to achieve dual band operation and improve antenna performance. The antenna operates at the resonant frequencies of 2.4GHz and 3.5GHz. The S11 values at these frequencies are -19.948dB and -26.151dB, respectively. The antenna's gain is 2.698dB at 2.4GHz and 1.359dB at 3.5GHz. The antenna design was simulated using CST Microwave Studio, and the measurements were conducted using a Vector Network Analyzer (VNA).

Downloads

Download data is not yet available.

Downloads

Published

20-11-2024

Issue

Vol. 16 No. 2 (2024)

Section

Articles

License

Open access licenses

Open Access is by licensing the content with a Creative Commons (CC) license. 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

How to Cite

Meor Said, M. A. ., Misran , M. H. ., Othman, M. A., Jaafar, A. S. ., Abd Manap, R. ., Suhaimi, S. ., & Hassan, N. I. (2024). Dual Band Antenna for Wi-Fi and 5G Communication. Journal of Science and Technology, 16(2), 20-29. https://penerbit.uthm.edu.my/ojs/index.php/JST/article/view/16344