Search

Search Results

• An Overview of Deterministic and Probabilistic Analytical Approaches for Non-Linear Seismic Risk Assessment of Structures

  Ayman Mohammad Mansour, Mohammad Ismail Al Biajawi

  415-424

  21-06-2022

• Physical Properties of Undisturbed Tropical Peat Soil at Pekan District, Pahang, West Malaysia

  Abdul Wahab, Muzamir Hasan, Faradiella Mohd Kusin, Zaidi Embong, Qamar Uz Zaman, Zaheer Uddin Babar, Muhammad Syamsul Imran

  403-414

  21-06-2022

• Improvement of Single-Switch Bridgeless PFC Cuk Converter for Circulating Current Elimination and Components Maximum Current Stress Reduction

  Mohamad Kamil Romai Noor, Asmarashid Ponniran, Jumadril JN, Munirah Az Zahra Abdul Rashid, Mohd Amirul Naim Kasiran, Mohd Hafizie Yatim, Suhaimi Saiman, Abdul Fatah Mat Said

  181-190

  07-03-2022

• A Comparative Study of Deep Learning Model and Simple Prediction Charts in Construction Noise Prediction

  Wei Chien Ooi, Dr. Lim MH, Dr. Lee YL

  391-402

  21-06-2022

• Reduction of Limb Position Invariant of SEMG Signals for Improved Prosthetic Control using Spectrogram

  E.F. Shair, M.F.A. Suleiman, A.R. Abdullah, N. Nazmi, N.Z. Saharuddin

  79-88

  20-05-2021

• Spectro-spatial Profile for Gender Identification using Emotional-based EEG Signals

  Noor Kamal Al-Qazzaz, Mohannad K. Sabir, Sawal Hamid Md Ali, Siti Anom Ahmad, Karl Grammer

  67-78

  20-05-2021

• Identifying Elderly Patients at Risk of Falling using Time-Domain and Cyclostationarity Related Features

  Reem Brome, Jad Nasreddine, Frédéric Bonnardot, Mohamad O. Diab, Mohamed El Badaoui

  57-66

  20-05-2021

• Autism Spectrum Disorder Detection Based on Wavelet Transform of BOLD fMRI Signals using Pre-trained Convolution Neural Network

  Mohammed I. Al-Hiyali, Norashikin Yahya, Ibrahima Faye, Zia Khan

  49-56

  19-05-2021

• Feature Selection Analysis of Chewing Activity Based on Contactless Food Intake Detection

  Nur Asmiza Selamat, Sawal Hamid Md Ali, Khairun Nisa' Minhad, Jahariah Sampe

  38-48

  19-05-2021

• Towards Laparoscopic Visual AI: Development of a Visual Guidance System for Laparoscopic Surgical Palpation

  Kerwin G. Caballas, Harold Jay M. Bolingot, Nathaniel Joseph C. Libatique, Gregory L. Tangonan

  28-37

  19-05-2021

• A Review of Autism Spectrum Disorder Diagnostic Tools

  W. Z. Wan Azamudin, A.R. Syafeeza, N. A. Ali, Kamal Nor. N

  329-345

  29-11-2022

• A Mobile Solution for Lateral Segment Photographed Images based Deep Keratoconus Screening Method

  W Mimi Diyana W Zaki, Marizuana Mat Daud, Assyareefah Hudaibah Saad, Aini Hussain, Haliza Abdul Mutalib

  18-27

  19-05-2021

• Association between Diabetes Mellitus and Sepsis for the Glycemic Control Outcome of Two Intensive Care Units in Malaysia

  Jihan Zukhi, Fatanah M. Suhaimi, Mohd Zulfakar Mazlan, Mastura Mohd Sopian, Nizuwan Azman, Ummu K. Jamaludin, Normy Razak

  9-17

  19-05-2021

• A Review on Usability and User Experience of Assistive Social Robots for Older Persons

  Isa Halim, Adi Saptari, Puvanasvaran A. Perumal, Zulkeflee Abdullah, Shariman Abdullah, Mohd Nazrin Muhammad

  102-124

  08-11-2022

• Evaluation Methodology for Respiratory Signal Extraction from Clinical Cone-Beam CT (CBCT) using Data-Driven Methods

  Adam Tan Mohd Amin, Siti Salasiah Mokri, Rozilawati Ahmad, Fuad Ismail, Ashrani Aizzuddin Abd Rahni

  1-8

  19-05-2021

• Estimating Unsaturated Hydraulic Conductivity in Unsaturated Soil Using Soil Moisture Sensors

  Ong Sin Tian, Goh Eng Giap, Rudiyanto, Mohammad Fadhli Ahmad, Roslaili Abdul Aziz

  265-272

  04-04-2023

• Network Planning Analysis on Road Construction Projects by CV. X Using Evaluation Review Technique (PERT)-Critical Path Method (CPM) and Crashing Method

  Yuniar Farida, Lulita

  377-390

  21-06-2022

• Fabrication and Experimental Evaluation of Simple Tissue-Mimicking Phantoms with Realistic Electrical Properties for Impedance-Based Sensing

  Jan Liu, Chris Goehring, Frank Schiele, Knut Moeller, Peter P. Pott

  127-136

  23-05-2021

• Adsorption of Basic Dyes Crystal Violet on Agricultural Biomass: Characterization, Isotherm, and Kinetic Studies

  Risky Ayu Kristanti, Adhi Yuniarto, Tony Hadibarata

  269-275

  07-03-2022

• Load Management System with Integration of Renewable Energy Resources

  Faizan Rashid, Adeel Gilany, Saim Rasheed, Hamza Nisar, Ali Raza, Muhammad Hasnat

  339 - 348

  15-08-2021

• Modelling Temperature and Strain-Rate Dependence of Recycled Aluminium Alloy AA6061

  C. S. Ho, M. K. Mohd Nor, M. S. A. Samad

  135-145

  08-11-2022

• The Earth-Air Heat Exchanger System Performance Combined with a Solar Collector for Cooling an Indoor Space Room in Medan City

  Tulus Burhanuddin Sitorus, Syahrul Abda, Terang Ukur Hidayat Solihin Ginting Manik

  146-155

  08-11-2022

• Investigating The Load Carrying Capacities of Lightweight Foamed Concrete Strengthen with Fiber Mesh

  Azree Othuman, Anisah, Abdul Naser Abdul Ghani

  360-376

  21-06-2022

• Runway Pavement Strength Evaluation of Yogyakarta International Airports with COMFAA 3.0 Software

  Anita Rahmawati, Fajar Rahmawati

  350-359

  21-06-2022

• Road Accident Data Collection Systems in Developing and Developed Countries: A Review

  Muhammad Babar Ali Rabbani, Muhammad Ali Musarat, Wesam Salah Alaloul, Saba Ayub, Hamna Bukhari, Muhammad Altaf

  336-352

  07-03-2022

• Empirical Study of Drone-LoRa Enable Performance to Doppler Robustness for Livestock Industry

  Aishah Mohd Noh, Rosdiadee Nordin

  212 - 227

  21-06-2022

• Intensity Stability Comparison Between Different Colors of Laser Pointer

  S. Nurulain, H. Manap, MA Zawawi, RM Ramli

  259 - 264

  04-04-2023

• Earthquake Risk Assessment of Sabah, Malaysia Based on Geospatial Approach

  Noor Suhaiza Sauti, Mohd Effendi Daud, Masiri Kaamin, Suhaila Sahat

  38-48

  06-09-2022

• The Machinability Performance of RBD Palm Oil Dielectric Fluid on Electrical Discharge Machining (EDM) of AISI D2 Steel

  Aiman Supawi, Said Ahmad, Nur Ismaliza Ismail, Norfazillah Talib, Woon Kiow Lee , Reazul Haq Abdul Haq, Ho Fu Haw, Mohd Rasidi Ibrahim, Fazida Karim

  140-149

  07-03-2022

• Low Leakage Low Power Domino Logic Technique for Wide Fan-In Applications, 40-Bit Tag Comparator Domino based TAG Comparator

  Sapna Rani Ghimiray, Pranab Kishore Dutta

  248-261

  21-06-2022

• Geographical Information System (GIS) and Remote Sensing (RS) Applications in Disaster Risk Reduction (DRR) in Malaysia

  Nazirah Mohamad Abdullah, Noralfishah Sulaiman, Umber Nazir, Maziah Ismail, Siti Kursiah Kamalia Abdul Latib, Nur Putri Najwa Mahmud

  25-37

  06-09-2022

• Assessment of Global Geopotential Models for Modelling Malaysia Marine Geoid

  Ami Hassan Md Din, Noor Anim Zanariah Yahaya, Abdullah Hisam Omar, Nornajihah Mohammad Yazid, Nazirah Mohamad Abdullah, Muhammad Faiz Pa'suya, Mohamad Ikbar Abdul Wahab

  13-24

  06-09-2022

• Multiple Linear Regression in Predicting Motor Assessment Scale of Stroke Patients

  Sulaiman Mazlan, Hisyam Abdul Rahman, Babul Salam Ksm Kader, Che Fai Yeong, Nurul Aisyah Mohd Rostam Alhusni

  330 - 338

  15-08-2021

• Modelling and Experimental Study of Dissimilar Arc Stud Welding of AISI 304L to AISI 316L Stainless Steel

  Marwan T. Mezher, Osamah Sabah Barrak, Nasri S. M. Namer

  88-101

  08-11-2022

• Rubber-Tree Leaf Diseases Mapping Using Close Range Remote Sensing Images

  Abd Wahid Rasib, Nurmi-Rohayu Abd Hamid, Muhammad Latifi Mohd Yaacob, Zarawi Abd Ghani, Nurul Hawani Idris, L M S Alvin, Muhammad Imzan Hassan, Khairulnizam M Idris, Rozilawati Dollah, Anuar Mohd Salleh, Mustaffa Bin Anjang Ahmad

  1-12

  06-09-2022

• Aerodynamic Analysis on the Effects of Frontal Deflector on a Truck by using Ansys Software

  Pavin Kumaar Varadarajoo, Izuan Amin Ishak, Daniel Syafiq Baharol Maji, Nurshafinaz Mohd Maruai, Amir Khalid, Norirda Mohamed

  77-87

  08-11-2022

• A Comprehensive Review of Congestion Management in Power System

  P Manohar, P. Rajesh, Francis H Shajin

  346-362

  29-11-2022

• Dimensional Stability of Lightweight Foamed Concrete Containing Eggshell Powder and Calcium Stearate

  Hock Yong Tiong, Siong Kang Lim, Yee Ling Lee

  260-268

  07-03-2022

• Numerical Investigation on the Effect of Composite Corrugated Cores in Lightweight Sandwich Panels under Planar Impact Loading

  Majid Jamal-Omidi, Mahmood Zabihpoor, Mehdi Vaezi, Ali Choopanian Benis

  63-76

  08-11-2022

• Disaster Preparedness Assessment Tools of Structural Performance for Indonesian School Buildings

  Mia Wimala, Joshua Irawan, Wisena Perceka

  363-377

  29-11-2022

• Characterization of Bond-Slip Behaviour of the Profiled Steel Sheet Dry Board (PSSDB) Composite System

  Aina Syafawati Roslan, Masni A. Majid, Z. M. Jaini, Nur Adidah Sutiman

  329-336

  25-02-2021

• Initial Study On Safety Hazards by Heavy Transportation On Malaysian Roads

  Izatie, Shamsul Anuar Shamsudin, Norasra, Zairulazha, Huthaifa

  339-349

  21-06-2022

• Duplex Scheme of the Technological Impact of the Provision of Operational Properties of a Hardened Large Module Gears

  Magomed Hasanov, Alexander Klochko, Vadim Horoshaylo, Borys Vorontsov, Anton Ryazantsev

  55-62

  08-11-2022

• LSTM-Based Electroencephalogram Classification on Autism Spectrum Disorder

  Nur A. Ali, Syafeeza Ahmad Radzi, Shukur Jaafar, S. Shamsuddin, Norazlin Kamal Nor

  321 - 329

  15-08-2021

• A Review and Analysis of the Effects of Colors of Light On the Performance of Solar Photovoltaic Panels

  Saad Bin Abul Kashem, Akila Jayasinghe, Muhammad E. H. Chowdhury, Amith Khandakar, Azad Ashraf, Ansaruddin Kunju, A, Mohammad Nashbat, Mazar Hasan-Zia, Esmaeili Khalil Saraei Amin, Mujahid Tabassum, Saleem Ahmed

  116-136

  21-06-2022

• Hazard Identification and Job Safety Analysis for Improving Occupational Health and Safety in Fishing Net Sinking Process in Southern Thailand

  Junjira Mahaboon, Supabhorn Yimthiang, Donrawee Waeyeng, Siriporn Darnkachatarn

  201-211

  21-06-2022

• Heating Plates Placement Structure for Optimal Muscle Stress Relief with Low Power Consumption

  Mai Mariam Mohamed Aminuddin, Fatin Syafiqah Abdul Rahim

  239-247

  21-06-2022

• The Concept of Flexible Lower Limb Powered-Exoskeleton for Human Performance Augmentation: A Review

  Badrul Aisham Md Zain

  230-246

  30-12-2024

• An Optimization of Load Frequency Control Based on Hydraulic Power Plant Using Transfer Function Balanced PID Controller

  Rezi Delfianti, Ardyono Priyadi, Imam Abadi, Avian Lukman Setia Budi, Bima Mustaqim, Yudi Andika, Adi Soeprijanto

  310 - 320

  15-08-2021

• Factors Affecting Quality in Construction Project Life Cycle (CPLC)

  Siti Khalijah Yaman, Padzil@Fadzil Hassan, Nur Maisarah Yusop, Nur E’zzati Hashim, Hairuddin Mohammad, Hasniza Abu Bakar

  322-335

  07-03-2022

• Effect of Multi-Walled Carbon Nanotubes on Infill Material for Pipeline Composite Repair

  Hanis Hazirah Arifin; Norhazilan Md Noor; Libriati Zardasti, Nordin Yahaya, Kar Sing Lim, Nur Hafizah Abd Khalid, Siti Asma Abd Latif, Norhazilan Md Noor

  313-321

  07-03-2022

• Correlation Between Cutting Force and Residual Stress in Dry End-Milling of Inconel HX

  Mohd Nor N. A., Baharudin B. T. H. T., Leman Z., Mohd Ariffin M. K. A.

  47-54

  08-11-2022

• Adaptive Fuzzy-PID Controller for Liquid Flow Control in the Heating Tank System

  Sofian Yahya, Adnan Rafi Al Tahtawi, Kartono Wijayanto, Bani Faizah

  173 - 180

  07-03-2022

• Manufacturing Industry Performance Appraisals: Multi-Criteria Decision-Making Model

  Debrina Puspita Andriani, Febry Wijayanti, Ilma Visi Rahmani, Azizah Putri Nur Aini

  28-37

  08-11-2022

• Investigation of Cylinder Deactivation (CDA) Application on a Naturally Aspirated Engine

  Shaiful Fadzil Zainal Abidin, Amir Khalid, Mohd Farid Muhamad Said, Izzarief Zahari, Rifqi Irzuan Abdul Jalal

  125-134

  08-11-2022

• Hybrid Make-to-Stock and Make-to-Order (MTS-MTO)Scheduling Model in Multi-Product Production System

  Purba Daru Kusuma

  188-200

  21-06-2022

• Growblock: An Alternative Solution for Indoor Thermal and Visual Comfort Improvement

  Mia Wimala, Ariani Mandala, Budianastas Prastyatama, Yesaya Billy Surya Jaya Yap, Elvira

  313-322

  02-05-2021

• A Simulation of Facility Layout Improvement at Local Food Industry

  Nur Lyana Syahirah Suriansah, Salwa Mahmood, Muhammad Khairul Samat, Nur Syamimi Jiran

  16-27

  08-11-2022

• Deformation Mode and Energy Absorption Analysis of Bi-Tubular Corrugated Crash Box Structure

  Ismi Choirotin, Moch. Agus Choiron, Anindito Purnowidodo, Djarot Bangun Darmadi

  274-280

  27-09-2021

• Performance of Al-Air Battery with Different Electrolytes

  Mochammad Syamsul Maárif , Ardiansyah Zeen Fanani, Tjuk Oerbandono, Bayu Satria Wardana

  281-287

  27-09-2021

• Influence of Welding Parameters on Macrostructure, Microstructure and Mechanical Properties in Orbital Pipe Welding of A36 Mild Steel Pipe

  Ario Sunar Baskoro, Gandjar Kiswanto, Agus Widyianto, Muchamad Panji

  288-296

  27-09-2021

• Cutting Force and Surface Roughness Optimizations in End Milling of GFRP Composites Utilizing BPNN-Firefly Method

  M. Khoirul Effendi, Bobby O. P. Soepangkat, Rachmadi Norcahyo, Suhardjono, Sampurno

  297-306

  27-09-2021

• Study Of Various Thermal Conductivity Layers in Bioheat Transfer Against Thermal Distribution on Human Skin with Finite Difference Method (FDM)

  Slamet Wahyudi, Fakhrizal Azka Ramadhan

  307-314

  27-09-2021

• Effect of Chemical Treatments on Morphological, Physical and Mechanical Properties of Bamboo/Glass Fibers Hybrid Laminated Composite

  Ferriawan Yudhanto, Andika Wisnujati, Venditias Yudha, Putri Rachmawati, Kadek Rihendra Dantes

  315-323

  27-09-2021

• A Study of Identifying Trends in Projector using F-Term Codes from Japanese Patent Applications

  Yoshie Ishii, Ken Kaminishi, Shigeyuki Haruyama

  324-331

  27-09-2021

• On the Internal Enrichment Implementation for Non-Convex Paths, Discontinuities and Crack Problems

  Ali Tayebi Derazkola, Ali Rahmani Firoozjaee, Mehdi Dehestani

  171-187

  21-06-2022

• Human Response and Annoyance Towards Ground-Borne Vibration Induced by Railway Traffic

  Mohd Khairul Afzan Mohd Lazi, Muhammad Akram Adnan, Muhammad Akram Adnan

  296-312

  07-03-2022

• Effect of Ceramic Dust as Partial Replacement of Cement on Lightweight Foamed Concrete

  Yee Ling Lee, Siong Kang Lim, Ming Han Lim, Foo Wei Lee, Ming Kun Yew

  304-312

  02-05-2021

• Non-oscillatory Spatial Solutions Criterion for Convection-Diffusion Problem

  Aslam Abdullah

  247-257

  03-12-2020

• Study of Tensile Properties for Aluminum 6061 Reinforced With AISI 1060 Steel Machining Chips

  Nor Afzanizam Samiran, M.A. Mohamad Rus, N.N. Mat Hassan, M.Z. Ishak, I.A. Ishak

  241-246

  03-12-2020

• Structuring Framework for Early Validation of Product Ideas

  Laban Asmar, Khoren Grigoryan, Cheng Yee Low, Daniel Roeltgen, Arno Kühn, Roman Dumitrescu

  229-240

  03-12-2020

• Experimental the Influence of Growth Solution on Zinc Oxide Crystal Structures via Hydrothermal Method

  Nasha Emieza Ruhaizat, Ainun Rahmahwati Ainuddin, Zakiah Kamdi

  222-228

  03-12-2020

• Experimental Studies on Continuous Electrocoagulation Treatment of Peat Water in Sarawak with Copper Electrodes

  Nazeri Abdul Rahman, Allene, Elisa, Umang, Nurhidayah, Adarsh, Abdullah , Arif

  168-176

  02-12-2020

• Construction of Hexagonal Structures Using a 3D Bioprinter Based on Customized G-Code

  S.A. Othman, Chin Fhong Soon, K.S. Tee, M.K. Ahmad, N. Nayan, N. Sultana

  214-221

  03-12-2020

• Control Chart Pattern Recognition Using Small Window Size for Identifying Bivariate Process Mean Shifts

  Ashari Kasmin, I. Masood, N. Abdul Rahman, A.H. Abdul Kadir, M.N. Abdol Rahman

  208-213

  03-12-2020

• Identifying Unnatural Variation in Precision Rotational Part Manufacturing

  Ashari Kasmin, I. Masood, N. Abdul Rahman, A.L. Fadzillah, M.N. Abdol Rahman

  189-195

  03-12-2020

• Production Leveling System Implementation at Mixed Model Product with Heterogeneous Cycle Time for Single Operation Line

  Ahmad Naufal Adnan, A. Ismail

  196-201

  03-12-2020

• Step and Step-Nc as a Tool for Big Data in Cloud Manufacturing

  Noordiana Kasim, J. Jaafar, M.S.A. Mat Roseh, M.H. Mohamed Ali, R. Roslan, I.A. Bahrudin, S. Mat Yasin, J. Mohamed, A.H. Omar, M.F. Mohamed Nor, M.H. Jofri, M. Abdul Hamid, M.R. Azhar

  202-207

  03-12-2020

• Mobile Robot Path Planning using Q-Learning with Guided Distance and Moving Target Concept

  Pauline Ong, Ee Soong Low, Cheng Yee Low

  177-188

  03-12-2020

• Integrated Interface System of STEP Data Models for the Tool Path Generation

  Zammeri Abd Rahman, Saiful Bahri Mohamed, Mohammad Minhat, Alias Mohd, Zulkifli Abd Rahman

  160-170

  21-06-2022

• Design Optimization & Analysis of a Soft Crawling Robot

  Mariam Md Ghazaly, Siti Norazlin Mohd Basar, Muhammad Shadiq Lagani

  285 - 298

  15-08-2021

• Design of remote temperature monitoring system on automatic filling R125 Shinva machine using LM35 sensor and Arduino Uno microcontroller

  Fransiskus Tatas Dwi Atmaji

  280-290

  02-12-2020

• Pulverized Water Hyacinth as an Admixture for Concrete

  Ertie Abana, William Vega, Jaezel Gacias, Patrick John Rañon, John Denver Talattad, Herbert Orata, Jerone Perez

  298-303

  02-05-2021

• CFD Analysis on the Effect of Vortex Generator on Sedan Car using ANSYS Software

  Muhammad Pirdaus Ismail, Izuan Amin Ishak, Nor Afzanizam Samiran, Ahmad Faiz Mohammad, Zuliazura Mohd Salleh, Nofrizalidris Darlis

  73-83

  07-03-2022

• Bearing Resistance and Failure Mode of Bolted-layered Cemboard Panels

  A. F. Norhalim, Z. M. Jaini

  149-160

  28-12-2020

• Modeling of Automatic Door at Railroad Crossing Without Guard Based on Internet of Things in Indonesia

  Arthur Daniel Limantara, Vegyta Fakhrun Nisa, Edy Gardjito, Bambang Subiyanto, Fauzie Nursandah, Hery Lilik Sudarmanto, Vincentius Arthur Limantara, Devin Prayogo, Adolf Situmorang, Sri Wiwoho Mudjanarko

  140-148

  28-12-2020

• Thermal Conductivity Of Lightweight Concrete Block With Various Cooling Agent

  Masni A. Majid, Aina Syafawati Roslan, Noor Azlina Abdul Hamid, Norhafizah Salleh, Zalipah Jamellodin

  131-139

  28-12-2020

• Awareness and Readiness of Malaysian University Students for Emotion Recognition System

  Nor Azlina Ab Aziz, Nor Hidayati Abdul Aziz, Sharifah Noor Masidayu Binti Sayed Ismail , Chy Tawsif Khan, Muhammad Anas Hasnul, Md. Armanur Rahman, Tasiransurini Ab. Rahman, Kamarulzaman Ab. Aziz

  299 - 309

  15-08-2021

• Vibration Assessment on Various Distance to Demolition Works

  Tuan Norhayati Tuan Chik, Eric Soo Teck Lung, Nor Azizi Yusoff, Mohamad Taufik Tumiran, Ahmad Hafiz Farhan Mohd Suhaimi

  68-77

  28-12-2020

• Fluid Mixing Process Based on Programmable Logic Controller as Training Kit for Electrical Engineering Education Students

  Puput Wanarti Rusimamto, Muchlas Samani Munoto, I G.P. Asto Buditjahjanto, Ekohariadi, Nurlaela Luthfiyah, Endryansyah Mohammad Nuh

  104-111

  08-04-2021

• An Effect of Screw Extrusion Parameters On a Pottery Model Forming by A Clay Printing Machine

  Paphakorn Pitayachaval, Thanakharn Baothong

  38-46

  08-11-2022

• Human Responses to the Thermal Comfort in Air-Conditioned Building: A Climate Chamber Study

  Norfadzilah Jusoh, Ahmad Rasdan Ismail, Raemy Md Zein

  287-295

  07-03-2022

• Evolution of Microstructure and Wear Resistance of Carburized Low Carbon Steel

  Komkrisd Wongtimnoi, Thee Chowwanonthapunya

  66-72

  07-03-2022

• Comparison of Selected Agro-Based Filter Media for Stormwater Quality Improvement

  Nazaruddin Abdul Taha, Awang Nasrizal Awang Ali, Ani Aryanie Awang Aziz, Nurmin Bolong, Nazaruddin Abdul Taha

  251-259

  07-03-2022

• Investigation of Internal Gas Leakage on the Gate Valve using Acoustic Signal

  Ismail Mustapha, Mohamad Hanif Md Saad, Mohd Zaki Nuawi, Suhairy Sani, Shukri Mohd, Siti Fatahiyah Mohamad, Ratna Suffhiyanni Omar

  57-65

  07-03-2022

• Exergy and economic investigation of different strategies of hybrid systems consisting of gas turbine (GT) and solid oxide fuel cell (SOFC)

  Arman Maroufi, Jamasb Pirkandi, Mohammad Ommian

  127-139

  07-03-2022

• Investigation of Multiwavelength Performance Based on Different SOAs

  Norasmahan Muridan, Airull Azizi Awang Lah, Nelidya Md. Yusoff, Fairuz Abdullah, Azura Hamzah, Abdul Hadi Sulaiman

  92-103

  08-04-2021

• Life Cycle Assessment on the Direct Recycling Aluminium Alloy AA6061 Chips and Metal Matrix Composite (MMC-AlR)

  N.K. Yusuf, M.A. Lajis, A. Ahmad

  95-100

  01-09-2021

• Mechanical Properties of Direct Recycling Metal Matrix Composite (MMC-AlR) AA7075 Aircraft Aluminium Alloy

  N.K. Yusuf, A. S. Medi, M. A. Lajis, B. L. Chan, S. Shamsudin

  89-94

  01-09-2021

• Green Roof Retrofit: A Case Study

  Md Motiar Rahman; Shahriar Shams; Pengiran Haji Ros Ismandi Pengiran Ismail

  81-88

  01-09-2021

• Electrochemical Performance of SrWO4 Electrolyte for SOFC

  Ahmed Afif, Nikdalila Radenahmad, Juliana Zaini, Abdalla Mohamed Abdalla, Seikh Mohammad Habibur Rahman, Quentin Hoon Nam Cheok, Abul Kalam Azad

  74-80

  01-09-2021

• Synthesis and Structural Study of a Novel La0.67Ca0.33Cr0.9Cu0.1O3-? Anode for Syngas-Fuelled Solid Oxide Fuel Cell

  Nikdalila Radenahmad, Ahmed Afif, Md Sumon Reza, Shammya Afroze, Jun Young Park, Juliana Zaini, Juntakan Taweekun, Abul Kalam Azad

  68-73

  01-09-2021

• Optimal Sizing of Stand-alone PV System using Artificial Bee Colony Algorithm

  Md. Yusri, Ashraf Khalil, Swee Peng Ang

  54-67

  01-09-2021

• An Approximate Model of Load Frequency Control Systems with Time Delay

  M. Saad Haji-Bini, Yusri Yasmin, Ashraf Khalil, Swee Peng Ang

  40-53

  01-09-2021

• Greening Existing Buildings in Brunei Darussalam

  Nurnazerah H. Julayhe, Md Motiar Rahman

  34-39

  01-09-2021

• Adopting Industry 4.0 in Construction Industry

  Nurul Syazwana Mohammad Suferi, Md Motiar Rahman

  27-33

  01-09-2021

• SWOT Analysis for Electric Vehicles (EVs) in Thailand

  C Kongklaew, K Phoungthong, K Techato

  20-26

  01-09-2021

• Design and Implementation of Lab Scale Automated Solar Powered Irrigation and Fertigation System

  Khairul Zaman, Muhammad Azizuddin, Abdul Azim Morni, Anisah Zuhairah, Ashraf Khalil, M. R. Uddin, Swee Peng Ang

  9-19

  01-09-2021

• Influence of Precracking Techniques on Fracture Toughness of Carbon-Carbon Composites

  Sunil Kumar B V

  137-144

  31-08-2021

• Characteristic of Fuzzy, ANN, and ANFIS for Brushless DC Motor Controller: An Evaluation by Dynamic Test

  Widjonarko, Andi Setiawan, Bayu Rudiyanto, Satryo Budi Utomo, Muji Setiyo

  274 - 284

  15-08-2021

• Investigation of Accelerated Salt Spray Corrosion on Mechanical Response of Al6061T6 and Al7075T6 Alloys

  Sunil Kumar S, Neelakantha V Londe, Dilip Kumar K, Mohammed Ibrahim Kittur, Irfan Anjum Badruddin, Mohammed Faheem, Sher Afghan Khan

  48-56

  07-03-2022

• Alteration of Physico-mechanical Properties of Black Tilapia Scale Gelatins using UVA and UVC Irradiation

  Kanageswary Sockalingam, Hasan Zuhudi Abdullah, Maizlinda Izwana Idris

  150-156

  07-03-2022

• Energy Performance Contracting Initiative in Malaysian Public Hospitals

  Syukri, Noor , Roslan

  234-245

  28-12-2020

• Biochemical Oxygen Demand, Nitrogen, Phosphorus and Navigational Carrying Capacities of Bengoh Reservoir for Potential Aquaculture and Recreational Developments

  Esther , Puong

  224-233

  28-12-2020

• Monitoring of Deformation Behaviour of Unsaturated Soil Slope using Distributed Optical Fibre Sensor

  Dayangku, Azman

  199-207

  28-12-2020

• Parametric Study on the Influence of Embedded SPR to the Performance of Square CFST Columns

  Azim , Azrul , Shahrizan , Hamidon

  191-198

  28-12-2020

• Study on Precast Coconut Shell Concrete Beam-Column Junction Using M-Sand under Static Load

  Ramasubramani, Gunasekaran

  216-223

  28-12-2020

• Flexural Resistance of Steel-Coconut Shell Concrete-Steel Composite Beam with Normal and J-Hook Shear Studs

  Lakshmi , Gunasekaran

  208-215

  28-12-2020

• Investigation on The Factors Affecting Lifestyle of Professionals in The Construction Industries (Kerala and Tamil Nadu)

  Anandh , Gunasekaran, Mannan

  246-252

  28-12-2020

• Investigation on the Flexural Behaviour of Steel Cold Formed Built up Sections

  Preethi, Kannan , Jegan

  184-190

  28-12-2020

• Characteristics of Drivers' Lane Choice at Large Multi-lane Roundabout

  Elizabeth, Rahma

  176-183

  28-12-2020

• Development of Consolidated Sarawak Geotechnical Site Investigation for Sarawak Soil

  Norazzlina , Razak , Bong, Linda, Lin , Louisa

  169-175

  28-12-2020

• Design Concept of a Motorcycle Secondary Electronic Lock

  Rais Hanizam Madon, Mas Fawzi, Muhamad Khairul Ilman Sarwani, Putera Mohamad Adam Amat Azman, Ahmad Fauzan Abdullah, Mohamad Ashik Abdullah

  1-8

  01-09-2021

• Smart Dairy Cattle Farming and In-Heat Detection through the Internet of Things (IoT)

  Nilo Arago, Rodney Rafael Robles, Chris Alvarez, Angelita Mabale, Charl Legista, Nicole Repiso, Timothy Amado, Romeo Jr. Jorda, August Thio-ac, Lean Karlo Tolentino, Jessica Velasco

  157 - 172

  07-03-2022

• Categorizing Natural Language-Based Customer Satisfaction: An Implementation Method Using Support Vector Machine and Long Short-Term Memory Neural Network

  Ralph Sherwin A. Corpuz

  77-91

  08-04-2021

• The tendency of Nature towards Hexagon Shape Formation due to Minimizing Surface Energy

  Ab Aziz Mohd Yusof, Mohd Al-Fatihhi Mohd Szali Januddi, Kamariah Md Isa, Muhamad Noor Harun

  40-47

  07-03-2022

• Development of a Mobile Robot with Camera-based Target Tracking and Obstacle Avoidance Systems

  Mohamed Fitri Mohamad Jamatolail, Radzi Ambar, Mohd Helmy Abd Wahab, Khalid Isa, Herdawatie Abdul Kadir, Muhammad Shukri Ahmad, Muhammad Mahadi Abd Jamil, Masoud Mohammadian

  236-245

  26-10-2020

• A Hybrid Segmentation Pattern of Partial Transmission in Computer Networks to Reduce the Complexity Level

  Rasha Subhi Hameed, Noora Shihab Ahmed, Tameem Mohammed Mahmood

  224-235

  26-10-2020

• Isolated Magnetic Dipole MIMO Antenna with Linear Port Configuration for Wireless Applications

  M. A. Aris UTHM, H. Jaafar, A. N. Jaafar, F. N. M. Redzwan, R. Abdullah

  246-253

  26-10-2020

• Design an Intelligent System to automatically Tutor the Method for Solving Problems

  Hien D. Nguyen, Dung A. Tran, Huan P. Do, Vuong T. Pham

  211-223

  26-10-2020

• Piezoelectric Photoacoustic System for Fluid Flow Monitoring

  Hui Ling Chua, Audrey Huong

  204-210

  26-10-2020

• Development of the PC-based Integrated Interface System of STEP file for CNC Machining Application: Circular Features

  Muhammad Abdulrahim Rabbani Md Sharizam, Saiful Bahri Mohamed, Tengku Mohd Shahrir Tengku Sulaiman, Zammeri Abd Rahman, Roslan Awang

  195-203

  26-10-2020

• A Patternless Piezoelectric Energy Harvester for Ultra Low Frequency Applications

  M. R. Awal, M. Jusoh, T. Sabapathy, R. B. Ahmad, M. R. Kamarudin, M. N. Osman, M F. Ahmad, S. A. Rahman, A. N. Dagang

  187-194

  26-10-2020

• Mathematical Model for Approximation the Efficiency of Parallel Computing on Single Board Cluster with Least-squares Approximation

  Chotitham Thanrak, Sasalak Tongkaw

  181-186

  26-10-2020

• Improved Event-Based Pi Controller for Limit Cycles Avoidance

  Noraide Md Yusop, Rosbi Mamat

  63-76

  08-04-2021

• Behavior of High Strength Hybrid Reinforcement Concrete Beams

  Khanda Ali Al-Billbassi, Mushriq Fuad Kadhim Al-Shamaa

  254-267

  26-10-2020

• The Mathematical Modeling Stages of Combining the Carriage of Goods for Indefinite, Fuzzy and Stochastic Parameters

  Sergiy Kotenko, Vitalii Nitsenko, Iryna Hanzhurenko, Valerii Havrysh

  173-180

  26-10-2020

• The Readiness of Automotive Manufacturing Company on Industrial 4.0 Towards Quality Performance

  Rosmaini Tasmin, Nurul Syahira Rahman, Ishaq Jaafar, Nor Aziati Abd Hamid, Yunos Ngadiman

  160-172

  31-10-2020

• The Impact of ICT on Economic Growth in the Fourth Industrial Revolution: Modeling Using Principal Component Panel Regression

  Wahyu Wibowo, I Nyoma Budiantara, Regina Niken Wilantari, Desita Amara

  151-159

  31-10-2020

• Is Malaysia ready for Industry 4.0? Issues and Challenges in Manufacturing Industry

  Yong Ma Ling, Nor Aziati Abdul Hamid, Lee Te Chuan

  134-150

  31-10-2020

• Green Lean Practices towards Increasing Operation Value of Manufacturing Company

  Ahmad Nur Aizat Ahmad, Md Fauzi Ahmad, Norhadilah Abdul Hamid, Yunos Ngadiman, Mohamed Ismail Pakir, Gusman Nawanir, Adnan Bakri, Mustaqqim Abdul Rahim

  128-133

  31-10-2020

• An Exploratory Study and Impact of Fourth Industrial Revolution (4IR) on SMEs in the Middle East

  Hanin Alqam, Mohammed Saqib

  121-127

  31-10-2020

• Critical Factors Influencing User Experience on Passive Exoskeleton Application: A Review

  Isa Halim, Adi Saptari, Zulkeflee Abdullah, Puvanasvaran Perumal, Muhammad Zaimi Zainal Abidin, Mohd Nazrin Muhammad, Shariman Abdullah

  89-115

  21-06-2022

• A Review of Cloud-Based ERP Systems in SMEs

  Syammon Jaffa, Siti Aisyah Salim

  113-120

  31-10-2020

• A Novel and Robust Model of the GUPFC Controller System Based on Adaptive Fuzzy Logic- PI Controller to Enhance the Control System Performance in Following Reference Active and Reactive Power

  Fatima Zahra Messaoud, Hamza Tedjini, Abdeldjebar Hazzab, Mahyar Abasi, Youcef Meslem

  51-62

  08-04-2021

• Modeling The Microrelief Structure of Ti6Al4V Titanium Alloy Surface After Exposure to Femtosecond Laser Pulses

  Iaroslav Lytvynenko, Pavlo Maruschak, Hermann Seitz, Georg Schnell

  81-88

  21-06-2022

• Optimization of the Distance between Two Adjacent Multi-Story Buildings by Calculating the Earthquake Effect in Yogyakarta

  Yoga Aprianto Harsoyo Harsoyo

  59-67

  28-12-2020

• A Supervisory and Control System for Indoor Lettuce Farming

  Sheikh Iqmal Idzni, Kim Seng Chia

  249-259

  28-02-2021

• Earned Value Management System in Indonesian Construction Projects

  Manidyo Priyo

  37-45

  28-05-2021

• Modelling and Optimization of Energy Efficient Assembly Line Balancing Using Modified Moth Flame Optimizer

  Mohd Fadzil Faisae Ab Rashid, Nik Mohd Zuki Nik Mohamed, Ahmed Nurye Oumer

  25-39

  07-03-2022

• Correction of Errors During The Manufacture by Computer Numerical Control (CNC) of Blades for an Axial Hydrokinetic Turbine

  Jonathan Andres Graciano Uribe, J. Arbeláez, D. Hincapie, E. Chica, E. Torres

  13-24

  07-03-2022

• The Electrical Characteristics of Medium Voltage Insulators Against Contaminants at Coastal Area

  I Made Yulistya Negara, Dimas Anton Asfani, Daniar Fahmi

  265 - 273

  15-08-2021

• Design and Analysis of Different Optical Attocells Deployment Models for Indoor Visible Light Communication System

  Mohammed S.M Gismalla, Mohammad Faiz Liew Abdullah, Mustafa Sami Ahmed, Wafi A Mabrouk, Najib AL-Fadhali, Elsadig Saeid, A.S.M. Supa'at, B Das

  253 - 264

  15-08-2021

• A Technical Review on Reliability and Economic Assessment Framework of Hybrid Power System with Solar and Wind Based Distributed Generators

  Priyanka Paliwal

  233 - 252

  15-08-2021

• Traffic Accident Model Reviewed from The Factors of Driving Behaviour of Surabaya-Gempol Toll Road

  Dadang Supriyatno, Sri Wiwoho Mudjanarko,

  278-287

  15-09-2020

• Driving Behaviour of Elderly Drivers in Malaysia

  Naida Rosli, Kamarudin Ambak, Nurfatin Nadiah Shahidan, Nur Sabahiah Abdul Sukor, Sharifah Osman @Liew Shyuan Yei

  268-277

  15-09-2020

• Synthesis and Characterization of Dual Properties Coagulant from Natural Precursors for Raw Water Treatment

  Syazwani Mohd Asharuddin, Norzila Othman, Nur Shaylinda Mohd Zin, Mohd Fadhil Md. Din, Vicky Kumar

  257-267

  15-09-2020

• Methodological Role of Mathematics to Estimate Human Blood Pressure Through Biosensors

  Jegan R, P. Subha Hency Jose, P. Rajalakshmy, P. Anantha Christu Raj, Hannah Joice Kanmani, W. S. Nimi

  240-248

  28-02-2021

• Home Energy Management System and Internet of Things: Current Trends and Way Forward

  Wan Siti Halimatul Munirah Wan Ahmad, Nurul Asyikin Mohamed Radzi, Nagaletchumi Balasubramaniam

  295-306

  23-11-2021

• The Effect of Biomass Shapes on Combustion Characteristic in Updraft Chamber

  Wasu Suksuwan, Mohd Faizal Mohideen Batcha , Arkom Palamanit, Makatar Wae-hayee

  163-171

  24-04-2021

• Multi-objective Optimization of Turning Performance Characteristics using GA Coupled with AHP based Approach

  Santosh Tamang, M Chandrasekaran

  126-136

  31-08-2021

• Multi-Phase Nano Fluid Natural Convection in A Partially Divided Cavity for Cooling of Radioactive Waste Containers

  Mohammad Mohsen Peiravi, Javad Alinejad, Davood Domiri Ganji

  1-15

  08-11-2022

• Laboratory Study of High-Resistance Laterite-Based Geopolymer Bricks

  Somayeh Mollaei, Yaser Marabi, Dr. A Fahmi, Dr. A R Babaeian

  240-250

  07-03-2022

• Regulatory Justification of the Fundamental Concepts of Ergonomics in Wheeled Agricultural Machinery

  Irina Egorova, Nadezhda Petrenko, Anna Tokareva, Sergey Panchenko, Aleksandr Kalinin

  118-125

  31-08-2021

• The Optimum Field Configuration for Active MASW Survey on Peat Soil

  Mohd Khaidir Abu Talib, Kasbi Basri, Adnan Zainorabidin, Haliza Wahab

  121-130

  28-12-2020

• Review on Eggshell Waste in Tissue Engineering Application

  Siti Aisyah Razak, Najah Anis Aqilah Mat Isa, Sharifah Adzila Syed Abu Bakar

  64-80

  21-06-2022

• Acceptance of Electronic Health Records in Traditional Malay Medicine: An Exploratory Prototyping Approach

  Raja Rina Raja Ikram, Mohd Khanapi Abd Ghani; Lizawati Salahuddin; Mohd Hariz Mohd Naim, Ariff Idris, Ngo Hea Choon, Kasturi Kanchymalay, Abd Samad Hasan Basari, Nadiah Ishak, Noor Raihan Ab Hamid

  40-50

  08-04-2021

• Effect of FSW Parameters on The Microstructure and Mechanical Properties of T-joints between Dissimilar Al-Alloys

  Mohamed M. El-Sayed Seleman , Mohamed M Z. Ahmed, Rashad M. Ramadan, Basant A. Zaki

  1-12

  07-03-2022

• Classification of Mangosteen Surface Quality Based on Image Processing Using Support Vector Machine

  Slamet Riyadi, Cahya Damarjati, Nuri Primas, Tony K. Hariadi, Indira Prabasari, Nafi Ananda Utama, Ku Ruhana Ku-Mahamod

  288-294

  23-11-2021

• Integration the 6th category Business Excellence Framework, the 8th clause ISO 9001:2015 and the 6th category KPKU Indonesia Framework

  sri widaningrum, Musli Mohammad, M. Rasidi Ibrahim

  291-300

  03-12-2020

• Texture based Image Splicing Forgery Recognition using a Passive Approach

  Asif Hassan, V K Sharma

  112-121

  08-04-2021

• Investigation of Mechanical Properties of Recycled ABS Printed with Open Source FDM Printer Integrated with Ultrasound Vibration

  Shajahan Maidin, Ting K. H., Sim Y.Y.

  57-63

  21-06-2022

• A Systematic Review on Cardiovascular Stent and Stenting Failure: Coherent Taxonomy, Performance Measures, Motivations, Open Challenges and Recommendations

  Ali Kamil Kareem, Mustafa M. Gabir, Omar Mohammed Almoayed, A. E. Ismail, Ishkrizat Taib, Nofrizalidris Darlis, I. R. Ali

  102-126

  07-03-2022

• Systematic Literature Review of Role of Applied Geomatics in Mapping and Tracking Corona Virus

  Nazirah Mohamad Abdullah, Shuib Rambat, Mohammad Hafiz Mohd Yatim, Abdullah Hisam Omar, Muhamad Nur Muhamad Yatim

  251-256

  31-08-2020

• Statistical Optimization Using Response Surface Methodology for Enhanced Tensile Strength of Polyethylene/Graphene Nanocomposites

  Wan Nazri Wan Busu, Ruey Shan Chen, Dalila Shahdan, Muhammad Jefri Mohd Yusof, Mohamad Jani Saad, Sahrim Ahmad

  109-117

  31-08-2021

• Effect of Opening Size on Wind-Driven Cross Ventilation

  Lip Kean Moey, Yao Horng Sing, Vin Cent Tai, Tze Fong Go, Yaw Yoong Sia

  99-108

  31-08-2021

• Investigation of Multiple Transceiver System for Free Space Optical Communication

  Tan Li Zhi, Hii King Ung, Cynthia Kon, Kong Jer Chuan

  159-167

  02-12-2020

• Design of a 1.9 GHz low-power LFSR circuit using the Reed-Solomon algorithm for Pseudo-Random Test Pattern Generation

  Vishnupriya Shivakumar, C. Senthilpari, Zubaida Yusoff

  220 - 232

  15-08-2021

• Optimal Placement of Shunt Capacitor in Distribution System by Particle Swarm Optimization

  Shahzor Ahmed, Mahesh Kumar, Amir Mahmood Soomro

  265-272

  20-07-2020

• Power Electronic Converters for Single-Phase Grid Connected Photovoltaic System: An Overview

  Ghulam Mustafa Shoro, D. M. Akbar Hussain

  253-264

  20-07-2020

• Design and Implementation of Hybrid Active Power Filter (HAPF) for UPS System

  Mahendar Kumar, Zubair A Memon, M. Aslam Uqaili

  229-238

  19-07-2020

• PWM Based VSC For Power Quality Assessment of Grid Integrated DFIG-WECS

  M.A Soomro, Z.A Memon, M. Kumar

  239-252

  20-07-2020

• Effect of Hydrostatic Pressure on the Revers Gate-Current of AlGaN/GaN HEMTs

  Rajab Yahyazadeh, Zahra Hashempour

  276-287

  23-11-2021

• Finger Vein Recognition Using Principle Component Analysis and Adaptive k-Nearest Centroid Neighbor Classifier

  Bakhtiar Affendi Rosdi, Nordiana Mukahar, Ng Tze Han

  177-187

  30-01-2021

• Comparison of BCH Code Performance in LTE-Advanced Cooperative System in Suburban, Urban and Rural Environment Based on WINNER II Channel Model

  Mohammed Fadhil, Asma Abu-Samah, Dr Rosdiadee Nordin, Mahamod Ismail, Nor Fadzilah Abdullah

  262-275

  23-11-2021

• Selection Combiner in Time-Varying Amplify Forward Cooperative Communication

  Sylvia Ong, Hushairi Zen

  146-158

  02-12-2020

• Design and Investigation of RGB-type LED Visible Light Communication System

  Jonathan Hong Tai Sia , Melvin Chun Chiak Kho, King Ung Hii, Lisa Yong

  136-145

  02-12-2020

• Rapid-Slow Sand Filtration for Groundwater Treatment: Effect of Filtration Velocity and Initial Head Loss

  Mohammad Hakim Che Harun, Muhammad Irfan Ahmad, Asmadi Ali, Sofiah Hamzah

  276-286

  07-03-2022

• Utilizing Artificial Neural Network and Multiple Linear Regression to Model the Compressive Strength of Recycled Geopolymer Concrete

  Stephen Adeyemi Alabi, Jeffrey Mahachi

  43-56

  21-06-2022

• A Novel Authentication and Key Agreement Scheme for Countering MITM and Impersonation Attack in Medical Facilities

  Steve Olsen Maikol, Adnan Shahid Khan, Yasir Javed, Anderson Lau Anak Bunsu, Chelsten Petrus, Heindwick George, Simon Jau

  127-135

  02-12-2020

• Optimization of Fixed-Bed Sequencing Bio-Reactors Using Jute Fibre for Seafood Processing Wastewater Treatment

  Muhammad Asyraf Zulkipli, Juliza Abu Bakar, Mahbooba Bakar, Radin Maya Saphira Radin Mohamed, Adel Al-Gheethi

  321-328

  25-02-2021

• Online Person Identification based on Multitask Learning

  Annie Joseph, Edward Ijau Anak Pelias Pog, Kho Lee Chin, David Bong Boon Liang, Dyg Azra Awang Mat, Ngu Sze Song, Rilies Rulaningtyas

  119-126

  02-12-2020

• Early Detection of Depression using Screening Tools and Electroencephalogram (EEG) Measurements

  Wong Hui Ming, Arifah Bahar, Khairul Radhi Bahar, Mitra Mohd. Addi

  216-228

  19-07-2020

• Smart Health Internet of Thing for Continuous Glucose Monitoring: a Survey

  Nuhu Yusuf, Aminu Hamza, Rilwan Sabo Muhammad, Maryam Aminu Suleiman, Zainab Aminu Abubakar

  54-61

  03-08-2020

• High-throughput Protein Sequence Alignment on Multi-core Systems

  Muhammad Yahya, Laiq Hasan, Syed Asad Ali

  62-71

  03-08-2020

• Cost Minimization of Aircraft Critical Components for Planning and Maintenance Requirements

  Fatin Hamizah Abdol Rahim, Norliza Mohd Noor, Haslaile Abdullah, Bayram Annanurov

  40-53

  03-08-2020

• IoT-Based Fire Safety System Using MQTT Communication Protocol

  Yuen Chark See , En Xiang Ho

  207-215

  19-07-2020

• Derivative Proportional – Integral Controller Using Nelder-Mead Optimization for Glycerine Purification Heating Process

  Zuriati Janin, Hazilah Mad Kaidi, Robiah Ahmad, Sheroz Khan

  200-206

  19-07-2020

• Palm Oil Soil Monitoring System for Smart Agriculture

  Roziyani Rawi, Muhammad Shakhil Iman Hasnan, Aznida Abu Bakar Sajak

  189-199

  19-07-2020

• Modelling the Effect of Human Body around User on Signal Strength and Accuracy of Indoor Positioning

  Firdaus, Noor Azurati Ahmad, Shamsul Sahibuddin, Rudzidatul Akmam Dziyauddin

  72-80

  09-08-2020