Vol. 13 No. 1 (2022)

Published: 16-05-2022

Use of Lawsonia Inermis and Sodium Nitrite as Surface Applied Corrosion Inhibitors

Nishant Kumar, Sunil Saharan

1-8
- PDF 1101
- Abstract View 603
Mechanical and Durability Properties of Foamed Concrete with the Addition of Oil Palm Trunk Fibre

Md Azree Othuman Mydin

9-24
- PDF 973
- Abstract View 538
Design and Analysis of a Passive Lighting Device for a Sustainable Office Environment in Hot-Arid Climate Conditions

Safa Daich, Mohamed Yacine Saadi, Ahmed Motie Daiche

25-38
- PDF 1006
- Abstract View 728
Climatic Influence on Slope Failure: A Case Study at Kem Terendak, Melaka

Raazlizam Lias, Ismacahyadi Bagus Mohamed Jais, Diana Che Lat

39-49
- PDF 2438
- Abstract View 772
Shear Strengthening Behavior of Reinforced Concrete Beam Using Non-Stressing Strands

Heri Kasyanto, Ambar Susanto, Susilahadi, Enung

50-56
- PDF 790
- Abstract View 435
Investigation on Soil Strength and Microstructure of Palm Oil Boiler Ash with Sodium Hydroxide and Sodium Silicate as Alkaline Solution

Atiqah Najwa Zainuddin, Mazidah Mukri, Norbaya Sidek

57-67
- PDF 975
- Abstract View 693
Using Waste Ceramic Dust in Stabilization of Clay Soils

Saya Abdullah Saber, Anoosheh Iravanian

68-80
- PDF 1511
- Abstract View 1195
The Influence of Industrial Steel Waste on Slump Test and Compressive Strength in Eco-Friendly Concrete Fabrication

Vijaya Prakash Vijayasree, Wan Lutfi Wan Johari

81-86
- PDF 736
- Abstract View 667
Research on Resistance to Sulfate and Chloride of Reinforced Metakaolin-Based Geopolymers

Yurdakul Aygörmez, Orhan Canpolat

87-101
- PDF 910
- Abstract View 579
Bibliometric Analysis of Post-Occupancy Evaluation (POE): Current Status, Development, and Future Research Directions

Wan Nor Faezah Wan Mustaffa, Adi Irfan Che Ani, Afifuddin Husairi Hussain

102-120
- PDF 1057
- Abstract View 877
Influence of Cement Dose on the Durability of Structures in Stabilized Compressed Earth Blocks

Sinko Banakinao, Soviwadan Drovou, Kodjo Attipou

121-129
- PDF 741
- Abstract View 523
Bond Strength Behavior in Rubberized Concrete

Hussein Al-Quraishi, Khudhayer Najim Abdullah Kammash, Zinah Asaad Abdul-Husain

130-136
- PDF 791
- Abstract View 467
Possibilities of Using Prefabricated Modular Panels for Building NZEB Buildings in Earthquake-Affected Areas in Croatia – Case Study

Hana Begic, Hrvoje Krstic

137-148
- PDF 837
- Abstract View 649
Knowledge Management Factors Affecting Construction Project Performance Model

Eman Mohammed Abdulrahman Alhammadi; Rozilah Kasim; Sonia Lohana

149-158
- PDF 1101
- Abstract View 839
Experimental Study on the Use of the Modifying Agent for Expansive Soil Stabilization: Mockup Test on a Case Study

Dang Hoang Minh, Nguyen Thi Nien

159-166
- PDF 741
- Abstract View 427
Physical and Chemical Characterization of Coffee Husk Ash Effect on Partial Replacement of Cement in Concrete Production

Werku Koshe Hareru, Firew Belayneh Asfaw, Tewodros Ghebrab

167-184
- PDF 1702
- Abstract View 2061
Evaluation of Indonesia's Conventional Track Performance Based on Mechanistic Approach

Dian M. Setiawan

185-201
- PDF 908
- Abstract View 735
Damage Parameter Variations of Breakwater along with a Floating Wave Barrier and a Submerged Obstacle

Alireza Naseri, Ramin Vafaeipour Sorkhabi, Mohammad Taghi Alami, Alireza Mojtahedi

202-217
- PDF 1344
- Abstract View 700
Thermal Performance and Energy Efficiency of Different Types of Walls for Residential Building

Hanizam Awang, Ying Yi Tan, Mohd Hafizal Mohd Isa

218-231
- PDF 1485
- Abstract View 654
A comparative study on Light Gauge Member and Castellated Beam

vanathi v, Venkatraman, B. Gokul Balaji

232-242
- PDF 754
- Abstract View 482
Use of Quarry Dust in the Binding Mortar and its Effect on Mechanical Characteristics of Brick Masonry

Kosalya , Arvinthan, Sathiparan Navaratnarajah

243-256
- PDF 595
- Abstract View 488
Recycled Aggregates Production Through Economic Perspectives

Kirati Nitichote, Wanchai Yodsudjai

257-263
- PDF 824
- Abstract View 539
Numerical Studies on CFRP Strengthened Cold formed Steel built-up Columns

Nahushananda chakravarthy H G, Jahnavi S J, Sivakumar Naganathan

264-272
- PDF 749
- Abstract View 523
An Attempt to Maximize the Use of Used Cooking Oil and Fly Ash in the Production of Green Roofing Tile

Wei Ping Teoh, Swee Yong Chee, Noor Zainab Habib, Choon Aun Ng

273-281
- PDF 745
- Abstract View 546

Vol. 13 No. 1 (2022)

Use of Lawsonia Inermis and Sodium Nitrite as Surface Applied Corrosion Inhibitors

Mechanical and Durability Properties of Foamed Concrete with the Addition of Oil Palm Trunk Fibre

Design and Analysis of a Passive Lighting Device for a Sustainable Office Environment in Hot-Arid Climate Conditions

Climatic Influence on Slope Failure: A Case Study at Kem Terendak, Melaka

Shear Strengthening Behavior of Reinforced Concrete Beam Using Non-Stressing Strands

Investigation on Soil Strength and Microstructure of Palm Oil Boiler Ash with Sodium Hydroxide and Sodium Silicate as Alkaline Solution

Using Waste Ceramic Dust in Stabilization of Clay Soils

The Influence of Industrial Steel Waste on Slump Test and Compressive Strength in Eco-Friendly Concrete Fabrication

Research on Resistance to Sulfate and Chloride of Reinforced Metakaolin-Based Geopolymers

Bibliometric Analysis of Post-Occupancy Evaluation (POE): Current Status, Development, and Future Research Directions

Influence of Cement Dose on the Durability of Structures in Stabilized Compressed Earth Blocks

Bond Strength Behavior in Rubberized Concrete

Possibilities of Using Prefabricated Modular Panels for Building NZEB Buildings in Earthquake-Affected Areas in Croatia – Case Study

Knowledge Management Factors Affecting Construction Project Performance Model

Experimental Study on the Use of the Modifying Agent for Expansive Soil Stabilization: Mockup Test on a Case Study

Physical and Chemical Characterization of Coffee Husk Ash Effect on Partial Replacement of Cement in Concrete Production

Evaluation of Indonesia's Conventional Track Performance Based on Mechanistic Approach

Damage Parameter Variations of Breakwater along with a Floating Wave Barrier and a Submerged Obstacle

Thermal Performance and Energy Efficiency of Different Types of Walls for Residential Building

A comparative study on Light Gauge Member and Castellated Beam

Use of Quarry Dust in the Binding Mortar and its Effect on Mechanical Characteristics of Brick Masonry

Recycled Aggregates Production Through Economic Perspectives

Numerical Studies on CFRP Strengthened Cold formed Steel built-up Columns

An Attempt to Maximize the Use of Used Cooking Oil and Fly Ash in the Production of Green Roofing Tile

Make a Submission

info

index

journalsofuthm