Numerical Studies on CFRP Strengthened Cold formed Steel built-up Columns

Authors

  • Nahushananda chakravarthy H G Siddaganga institute of technology
  • Jahnavi S J Siddaganga institute of technology
  • Sivakumar Naganathan Sri Sivasubramaniya Nadar College of Engineering

Keywords:

Finite element method, Built-up Section, Cold-formed Steel, CFRP, Buckling

Abstract

This paper reports the numerical investigation carried out on the Cold-formed steel (CFS) built up columns strengthened with a Carbon fiber-reinforced polymer (CFRP) by using Finite element software ABAQUS/CAE. The CFS sections used in the investigation are built-up Cold formed box sections connected together by screws. Totally 24 columns are considered for the analysis in that twelve columns used are plain CFS and other 12 columns used are CFRP strengthened CFS columns. The geometric properties of the materials considered as 0.6 mm, 0.75 mm and 1 mm thickness with 300 mm, 500 mm and 700 mm depth respectively. All the built-up columns were modeled and analysed using ABAQUS software. From the analysis results, the Ultimate load capacity, Buckling behavior and Load-lateral displacement of the Plain and CFRP strengthened columns are obtained and presented in this paper. It is also noted that the numerical results obtained from the ABAQUS software is in good agreement with the experimental results.

Downloads

Download data is not yet available.

Author Biography

Jahnavi S J, Siddaganga institute of technology

Post graduate student

Downloads

Published

16-05-2022

How to Cite

chakravarthy H G, N., S J, J. ., & Naganathan, S. (2022). Numerical Studies on CFRP Strengthened Cold formed Steel built-up Columns. International Journal of Sustainable Construction Engineering and Technology, 13(1), 264–272. Retrieved from https://penerbit.uthm.edu.my/ojs/index.php/IJSCET/article/view/10699

Issue

Section

Articles