Search

Search Results

• Influence of Two-line Emergent Floodplain Vegetation on a Straight Compound Channel Flow

  Mazlin Jumain, Zulkiflee Ibrahim, Zulhilmi Ismail, Nur Hartini Ibrahim, Md Ridzuan Makhtar, Mohd Rafique Nordin

  26-11-2013

• An Aquifer Reflections on Deep Clay Conditions for Water Quantity Assessments

  Sabariah Musa, Nor Azazi Zakaria, Lau Tze Liang

  11-09-2014

• Preliminary Study: Treatment of Food Industrial Wastewater using Two-Phase Anaerobic Treatments

  Shahrul Shafendy Ibrahim, Ab. Aziz Abdul Latiff, Zawawi Daud

  18-11-2013

• Critical Study of Corrosion Damaged Concrete Structures

  Sallehuddin Shah Ayop, John Cairns

  24-12-2013

• An Overview on Japan and Malaysia Peat Relating to Geotechnical Characteristic

  Mohd Khaidir Abu Talib, Noriyuki Yasufuku

  19-03-2014

• Nonlinear Simulation of Beam Elements Subjected to High Mass Low Velocity Impact Loading using the Smoothed Particle Hydrodynamics (SPH) Method

  Shahrul Niza Mokhatar, Sonoda Yoshimi, Zainorizuan Mohd Jaini

  26-12-2013

• Compressive and Tensile Capacity of Recycled Aggregate Concrete (RAC) with Glass as Supplement Material

  Suraya Hani Adnan, Tic C. Shen, Mohd Haziman Wan Ibrahim, Norwati Jamaluddin

  25-12-2013

• Failure Modelling of Woven GFRP Bolted Joints under Quasi-Static Loading

  Mohd Hilton Ahmad, Andrew D. Crocombe, Paul A. Smith

  25-12-2013

• WELCOME FROM THE CHIEF EDITOR

  Abdul Aziz Dato' Abdul Samad

  15-03-2022

• Ultra Wide Band localization and tracking hybrid technique using VRTs

  Mohd Shamian Zianal, Hadi Abdullah, Ijaz Khan

• The Development of control system via Brain Computer Interface (BCI) - Functional Electrical Stimulation (FES) for paraplegic subject

  K. A. A. Rahman, B. S. K. K. Ibrahim, M. M.A. Jamil, A.M. Leman

• The preliminary studies on preparation and characterization of bulk nanoporous zinc as a laser target candidate to generate soft x-ray

  Mohd Lutfi Ahmad Shahar, Shamsul Amir Abdul Rais, Mohamad Halim Abd. Wahid, Izzul Hasif Che Idris, Mazlee Mazalan, Mohd Fairus Ahmad, Mohd Natashah Norizan

• A NEW DESIGN of SIX- PHASE ROTARY CONVERTER ELECTRIC MACHINE

  K. G. Mohammed, A. Q. Ramli, U. A. Ungku Amirulddin

• Development of Low-Cost Current Controlled Stimulator for Paraplegics

  Aizan Masdar, B. S. K. K. Ibrahim, M. Mahadi Abdul Jamil

• Study on Finite Element Analysis of Fine Solid Lines by Flexographic Printing in Printed Antennas for RFID Transponder

  M. I. Maksud, M. S. Yusof, M. Mahadi Abdul Jamil

• Rapid Prototyping of Three-dimensional (3-D) Daubechies with Transpose-based Method for Medical Image Compression

  Noor Huda Ja'afar, Afandi Ahmad, Abbes Amira

  15-03-2022

• Covariance Bounds Analysis during Intermittent Measurement for EKF-based SLAM

  Hamzah Ahmad, Toru Namerikawa

• Real-time Simulation of Cardiac Excitation Using Hardwareimplemented Cardiac Excitation Modeling

  Farhanahani Mahmud

• Electricity Profile Study for Domestic and Commercial Sectors

  Asmarashid Ponniran, Nur Azura Mamat, Ariffudin Joret

• Surface Electromyography Feature Extraction Based on Wavelet Transform

  Farzaneh Akhavan Mahdavi, Siti Anom Ahmad, Mohd Hamiruce Marhaban, Mohammad-R. Akbarzadeh-T

• Investigation on the Potentials of Cupola Furnace Slag in Concrete

  Stephen Adeyemi Alabi, Joseph O. Afolayan

  31-12-2013

• Discriminate Modelling of Peak and Off-Peak Motorway Capacity

  Hashim Mohammed Alhassan, Sundara Parameswaren, Ben-Edigbe Johnnie

  06-02-2013

• Structural Behaviour of Precast Lightweight Foamed Concrete Sandwich Panel under Axial Load: An Overview

  Suryani Samsudin, Noridah Mohamad

  06-02-2013

• Overview of the Sustainable Uses of Peat Soil in Malaysia with Some Relevant Geotechnical Assessments

  Rashidah Adon, Ismail Bakar, Devapriya Chitral Wijeyesekera, Adnan Zainorabidin

  06-02-2013

• The Effects of Particle Morphology (Shape and Sizes) Characteristics on its Engineering Behaviour and Sustainable Engineering Performance of Sand

  Meng Siang Lim, Devapriya Chitral Wijeyesekera, Adnan Zainorabidin, Ismail Bakar

  06-02-2013

• Fire Safety Technology Related to Building Design and Construction

  W.K. Chow

  06-02-2013

• Some Built Environment Research Contributing to Sustainability

  Devapriya Chitral Wijeyesekera

  06-02-2013

• Sustainability: Linking Built and Natural Environment

  Maryati Mohamed, Mohd. Noh Dalimin

  06-02-2013

• Timber-Concrete Composite Floor Beams under 4 Years Long-Term Load

  David Yeoh, Koh Heng Boon, Lee Yee Loon

  24-12-2013

• Phytoremediation of Metals in Industrial Sludge by Cyperus Kyllingia-Rasiga, Asystassia Intrusa and Scindapsus Pictus Var Argyaeus Plant Species

  Ab. Aziz Abdul Latiff, Ahmad Tarmizi Abd. Karim, Ahmad Shukri Ahmad, Mohd Baharudin Ridzuan, Hung Yung-Tse

• The Integration of the Morphological Aspects of Sand to It's Shear Strength and Dilatancy Characteristics.

  Alvin John Lim

  01-10-2012

• Sludge Bed Granules' Growth in the HUASB Reactor Treating High Strength Industrial Wastewater

  Sinan Abood Habeeb, Ab. Aziz Abdul Latiff, Zawawi Daud, Zulkifli Ahmad

  02-12-2014

• WELCOME FROM THE CHIEF EDITOR

  Abdul Aziz Dato' Abdul Samad

• Design and Development of a Multi-sensor Monitoring Device for Arm Rehabilitation

  R. Ambar, M. S. Ahmad, M. M. Abdul Jamil

• Development of Artificial Hand Gripper by using Microcontroller

  A. M. Mohd Ali, A. J. M. Wahi, R. Ambar, M. M. Abdul Jamil

• Wheeling Charges Methodology for Deregulated Electricity Markets using Tracing-based Postage Stamp Methods

  M.Y. Hassan, N.H. Radzi, M.P Abdullah, F. Hussin, M.S. Majid

• Indoor Optical Wireless Receiver – Theory And Design

  M.F.L. Abdullah, R.J Green

• Control Modes Comparison Results Focused on Real Heat Exchanger System Response

  Dirman Hanafi, Abdulrahman A.A. Emhemed

• Optimized Fuzzy Control For Natural Trajectory Based Fes- Swinging Motion

  B.S.K.K Ibrahim, M.O. Tokhi, M.S. Huq, S.C. Gharooni

  04-05-2011

• Development of Vehicle Lighting System Using LED Application

  Asmarashid Ponniran, Azila Nor Azrani Mat Sor, Ariffuddin Joret, Handy Ali Munir

• A Design of Low Power Single Axis Solar Tracking System Regardless of Motor Speed

  Asmarashid Ponniran, Ammar Hashim, Ariffuddin Joret

• Image Analysis of Plasma Induced by Focused IR Pulsed Laser

  Ahmad Hadi Ali, Noriah Bidin

• Computational Analysis of Reinforced Concrete Slabs Subjected to Impact Loads

  Mokhatar Shahrul Niza

  01-10-2012

• Fabrication and analysis of dye-sensitized solar cell using natural dye extracted from dragon fruit

  Riyaz Ahmad Mohamed Ali, Nafarizal Nayan

• Ionospheric Drift Motions and Velocities at UTHM's Parit Raja Station During Periods of Low Solar and Geomagnetic Activities

  Abdull Zubi Ahmad, Ahmad Faizal Mohd Zain, Karthigesu Nagarajoo

  15-03-2022

• Design and Development of a portable Pulse Oximetry system

  Mohamed A. Zaltum, M. Shukri Ahmad, Ariffuddin Joret, M. Mahadi Abdul Jamil

• Structural and Electrical Properties of TiO2 Thin Film Derived from Sol-gel Method using Titanium (IV) Butoxide

  Isrihetty Senain, Nafarizal Nayan, Hashim Saim

• AN OVERVIEW OF WASTES RECYCLING IN FIRED CLAY BRICKS

  Aeslina Abdul Kadir

  01-10-2012

• Reflectarray Antenna with Radar Cross-Section Reduction

  Norbahiah Misran, M. Y. Ismail, M. T. Islam

• A Numerical Study on Magnetic Fields Effects on Stem Cell Differentiation

  Azizi Miskon, Jatendra Uslama

• Preliminary Design and Development of Open Field Antenna Test Site

  Ignatius Agung Wibowo, Mohammad Zarar Mohamed Jenu, C. Alireza

• WELCOME FROM THE CHIEF EDITOR

  Abdul Aziz Abdul Samad

• Design Modifications of a Thin Wall Part from Aluminium to Magnesium

  Haryanti Samekto

• The Performance Evaluation of Lightweight Concrete Piles on UTHM's Soft Soil under Static and Dynamic Loading Tests

  S. Agus, B. Ismail, S. Amir Khan

  15-03-2022

• An Evaluation on the Compliance to Safety Helmet Usage among Motorcyclists in Batu Pahat, Johor

  Kamaruddin Ambak, H. Hashim, I. Yusoff, B. David

  06-09-2011

• Study on Shear Strengthening of RC Continuous Beams with Different CFRP Wrapping Schemes

  Noorwirdawati Ali, Abdul Aziz Abdul Samad, J. Jayaprakash, W.M. Iesa, M.B.S. Alferjani

  06-09-2011

• Preliminary Study of S-Wave Velocity and Unconfined Compressive Strength of Cement- Palf Stabilised Kaolin

  Chee Ming Chan, S.S. Ch'ng

  06-09-2011

• The Development of Moisture Sensitivity Test for Compacted Asphalt

  M.K. Shamshuddin, M.E. Abdullah, S.M. Rhasbudin Shah3

  06-09-2011

• Effects of GFF Bands on Normal and High Strength Concrete Cylinders

  J. Jayaprakash, Abdul Aziz Abdul Samad, Noridah Mohamad, K.K. Choong, M.J. Megat Azmi, H.A.B. Badorul

• CO2 Uptake Model of Biomass Silica Foamed Concrete

  Yee Loon Lee, Heng Boon Koh, Ahmad Tarmizi Abdul Karim, Mia Wimala, C. Ng

• Experimental Investigation of CFRP Confined Columns Damaged by Alkali Aggregate Reaction

  Siti Radziah Abdullah

  01-10-2012

• Vermicomposting of food waste

  Norzila Othman

  01-10-2012

• INFLUENCE OF SULFATE AND CHLORIDE ON THE MECHANICAL PROPERTIES OF FIRED CLAY MASONRY WALL

  mohd haziman bin wan ibrahim

  01-10-2012

• Rigid Polyurethane Foam Reinforced Coconut Coir Fiber Properties

  Mohd Azham Azmi

  10-09-2012

• Identifying Causes of Construction Waste - Case of Central Region of Peninsula Malaysia

  Sasitharan Nagapan, Ismail Abdul Rahman, Ade Asmi, Aftab Hameed Memon, Rosli Mohammad Zin

  01-10-2012

• Zero-Tension Lysimeter for use in greywater irrigation monitoring

  Radin Maya Saphira Radin Mohamed

  01-10-2012

• Flood Wave Dynamics Using Lagrangian Block Advection

  Lai Wai Tan, Vincent H. Chu

  02-04-2014

• Laboratory Scale Seismic Surface Wave Testing for the Determination of Soil Elastic Profiles

  Aziman Madun

  01-10-2012

• Development of UTHM's Airship Virtual Simulator

  Azian Hariri, Darwin Sebayang, Ignatius Agung Wibowo

  09-03-2022

• Integrated Mechanical Pulse Jet Coolant Delivery System Performance for Minimal Quantity Lubrication

  Nik Fazli Sapian, Badrul Omar, Mohd Hamdi Abd Shukor

• ISO 14649 (STEP-NC): New Standards for CNC Machining

  Yusri Yusof

• Single Performance Optimization of Micro Metal Injection Molding for the Highest Green Strength by Using Taguchi Method

  M.H.I Ibrahim, N. Muhamad, A.B Sulong, K.R. Jamaludin, S. Ahmad, N.H.M Nor

• Prediction of Minimum Chip Thickness in Tool Based Micro End Milling

  Mohammad Yeakub Ali, Ahsan Ali Khan, Asfana Banu Mohamad Asharaf, Adibah Abdul Wahab

  16-05-2012

• Numerical Analysis of Auto-ignition of Ethanol

  Vasudevan Raghavan

  21-09-2011

• Experimental Study of Pre-mixed Flames on a Multi-Hole Matrix Burner

  Vasudevan Raghavan

  15-05-2012

• The Activity of Ni-Based Catalysts on Steam Reforming of Glycerol for Hydrogen Production

  ALI SALEM EBSHISH, Zahira Yaakob, Binitha Narayanan, Ahmed M. Bshish, Wan Ramli Wan Daud

  21-09-2011

• Employing Actual Shop-floor Status and Machine Tool Kinematic Data Model in Machining Simulation

  Aini Zuhra Abdul Kadir, Xun Xu, Firman Ridwan

  21-09-2011

• Kenaf Powder Filled Recycled High Density Polyethylene/Natural Rubber Biocomposites: The Effect of Filler Content

  Xuan Viet Cao, Hanafi Ismail, Azura A. Rashid, Tsutomu Takeichi

  10-09-2012

• A Comparative Study of Double Layers Al2O3/Al2O3 and Al2O3/SiO2 Prepared by Microwave and Natural Drying

  Nur Farhani Ismail

  10-09-2012

• The Effect of Paraffinic Mineral Oil Lubrication in Cold Forward Extrusion

  Mohd Hafis - Sulaiman

  21-09-2011

• Study on Sound Absorption Properties of Coconut Coir Fibre Reinforced Composite with Added Recycled Rubber

  S. Mahzan, A.M. Ahmad Zaidi, N. Arsat, M. N. M. Hatta, M. I. Ghazali, S. Rasool Mohideen

• Mechanical Properties of Medium Density Fibreboard Composites Material Using Recycled Rubber and Coconut Coir

  S. Mahzan, A.M. Ahmad Zaidi, M.I. Ghazali, N. Arsat, M.N. M. Hatta

• Application of Queuing Theory in Analyzing the Use of Production Capacity

  Muhammad Marsudi

• Influence of Post Weld Heat Treatment on the HAZ of Low Alloy Steel Weldments

  S. Rasool Mohideen, A.M. Ahmad Zaidi

• Optimisation of Sintering Factors of Titanium Foams Using Taguchi Method

  S. Ahmad, N. Muhamad, J. Sahari, K. R. Jamaludin

• Analysis of the Earth Movement over the Equatorial Region by using the Ionosonde Observation Data

  K Nagarajoo

• Design of FPGA- Based SPWM Single Phase Full-Bridge Inverter

  Afarulrazi Abu Bakar, Md Zarafi Ahmad, Farrah Salwani Abdullah

• Classification of Human Emotions from EEG Signals using Statistical Features and Neural Network

  Chai Tong Yuen, Woo San San, Tan Ching Seong, Mohamed Rizon

• Optimizing Machining Parameters during Turning Process

  sulaiman abdulkareem

  21-09-2011

• Finite Element Simulation in Superplastic forming of Friction Stir Welded Aluminium Alloy 6061-T6

  P Ganesh

  15-09-2011

• Analysis of Sensitization Profile in Medium Chromium Ferritic Stainless Steel (FSS) Welds

  Muhammed Olawale Hakeem Amuda, Shahjahan Mridha

  21-09-2011

• Analysis of Concentric Split Ring Square Element for Broadband Reflectarray Antenna

  S. H. Yusop, N. Misran, M. T. Islam, M. Y. Ismail

• Study of Frequency Selective Surfaces on Radar Cross Section Reduction

  M.Y. Ismail, N. A. N. M. Shamsani

• Study Of Phasing Distribution Characteristics Of Reflectarray Antenna Using Different Resonant Elements

  M.Y. Ismail, M. F. M. Shukri

• The Effectiveness of Pole Placement Method in Control System Design for an Autonomous Helicopter Model in Hovering Flight

  Abas Ab. Wahab, Rosbi Mamat, Syariful Syafiq Shamsudin

• Process Description for PLC Program Design

  A. Azmi, M.A.A. Shukor

• Design and Performance of QOSRGA Protocol for Mobile Adhoc Networks

  J. Abdullah

• Study of Laser – Induced Plasma Using Two Focusing Techniques

  Ahmad Hadi Ali, Noriah Bidin

• A Review: Durability of Fired Clay Brick Masonry Wall due to Salt Attack

  B.H. Abu Bakar, M.H. Wan Ibrahim, M.A. Megat Johari

• Compressive Strength and Water Permeability Performance of Micronised Biomass Silica Concrete

  S.H. Adnan, I. Abdul Rahman, Y.L. Lee, H. Yusof

• Finite Element Analysis of Elliptical Hollow and Concrete Filled Tube Columns

  Norwati Jamaluddin, D. Lam, D. Ye

• Modelling Thermal Stratification in Atrium Using TAS Program and Verification of Prediction Results

  A.H. Abdullah, F. Wang

• Study on Blast Pressure Resistance of Foamed Concrete Material

  A.M. Ahmad Zaidi, A. Abas, I. Abdul Rahman, M.I. Ghazali, N.H. Ahmad Zaidi

• Potential Effects on Large Mara Construction Projects Due To Construction Delay

  M.R. Abdullah, A.A. Abdul Azis, I. Abdul Rahman

• Analysis and Development of the Generic Maintenance Management Process Modeling for the Preservation of Heritage School Buildings

  A Z. A. Akasah, B. M. Alias

• Modelling Thermal Environmental Performance In Top-lit Malaysian Atrium Using Computational Fluid Dynamics (CFD)

  A.H. Abdullah, F. Wang

• Evaluation of Hybrid Membrane Bioreactor (MBR) For Palm Oil Mill Effluent (POME) Treatment

  Z. Ahmad, Z. Ujang, G. Olsson, A.A. Abdul Latiff

• Multi-Objective Genetic Algorithm Optimisation Approach for the Geometrical Design of an Active Noise Control Systems

  N. Jafferi, M. O. Tokhi

• Experimental Investigation on Shear Resistance Behaviour of RC Precracked and Non-Precracked T-Beams using Discrete CFRP Strips

  J. Jayaprakash, A.A. Abdul Samad, A.A. Ashrabov, K.K. Choong

• Finite Element Simulation on Crack Analysis of a Thick-Tube

  A.M. Ahmad Zaidi, M.M. Md Asif, I. Abdul Rahman, S.Rasool Mohideen, A.F. Ahmad Zaidi, N.H. Ahmad Zaidi, M.S. Yusof

• Finite Element Simulation on Damage and Fracture Properties of a Ring Cut from Filament-Wound Pipes with and without Delamination

  A.M. Ahmad Zaidi, H. Abdul Hamid, M.I. Ghazali, I. Abdul Rahman, S. Mahzan, M.S. Yusof

• Development of Polymer Nanocomposites for Rapid Manufacturing Application

  M.S. Wahab, K.W. Dalgarno, R.F. Cochrane

• The Application of Spreadsheet Model Based on Queuing Network to Optimize Capacity Utilization in Product Development

  Muhammad Marsudi, Dzuraidah Abdul Wahab, Che Hasan Che Haron

• Investigation of Surface Roughness and Material Removal Rate (MRR) on Tool Steel Using Brass and Copper Electrode for Electrical Discharge Grinding (EDG) Process

  M. Hafiz Helmi, M. Azuddin, W. Abdullah

• Heat Transfer Studies in Tube Banks with Integral Wake Splitters

  Suzairin Md Seri, Mohd Faizal Mohideen Batcha, Vijay R. Raghavan

• Effect of Titanium Dioxide on Material Properties for Renewable Rapeseed and Sunflower Polyurethane

  A.Z. Mohd Rus

• A Study on Surface Roughness and Burr Formation of Al6061 with Different Spindle Speed and Federate for Small End Milling Cutter

  M. Azuddin, W. Abdullah

• An Experimental Work on Multi-Roller Burnishing Process on Difficult to Cut Material – Titanium Alloy

  S. Thamizhmanii, S. Hassan

• Assessing the Impact of Standby Charges on the Financial Viability of Rooftop Solar PV Systems in Malaysia

  Shuhaimi Ismail , Khazaren Kusaini, Shahrulnizam Siran, Kamil Abdullah

  213-225

  28-04-2026

• Dynamic Cement Supply Chain Planning Using Integrated Logarithmic Regression and Fuzzy Inference in Indonesia

  Yudi Maulana, Bukhari Manshoor, Reazul Haq Abdul Haq, Mohammad Fahmi Abdul Ghafir, Izzuddin Zaman, Syahreen Nurmutia, Mairizal Zainuddin, Cristine Rothe, Abdul Rafeq Saleman, Mohd Nizam Ibrahim

  40-49

  18-06-2026

• Early Chilli Disease Detection Based on Leaves Images Using Convolution Neural Network (CNN)

  Nurin Jazlina Zulkepple, Mazidah Tajjudin

  182-198

  18-06-2026

• A Systematic Review of Energy Aware Routing Protocols for Underwater Acoustic Sensor Networks

  Sudha Sakthivel, K. Venkatesan, K. Ramachandra Reddy, M.Muthulakshmi, Syarifah Bahiyah Rahayu

  34-45

  15-04-2026

• Design of Fourth Order Gm-C Low-Pass Filter for Microsensor Readout

  Pugazhenthi R, Ananiah Durai S, Nabihah Ahmad

  59-71

  15-04-2026

• Characterization and Application of Na/SnO₂ Catalyst in Biodiesel Production: Insights into Structure and Performance

  Zeng Feihu Zeng, Chen Xiaohua, Feng Wang, SyYi Sim, Lu Huangteng

  72-83

  15-04-2026

• A Nonlinear PID Control for Time-varying Batch Processes by Using Particle Swarm Optimization

  Zhiwen Wang, Shunfeng Ji, Amirul Syafiq Sadun, Zheng Chen, Qun Zhuang

  84-98

  15-04-2026

• A Cost-Effective Electrical Stimulation Device for Non-Pharmacological Pain Management During Pregnancy

  Muhammad Omar Cheema, Zia Mohy Ud Din, Jahan Zeb Gul, Fawad Salam Khan, Mohd Norzali Haji Mohd, David Lim

  99-110

  15-04-2026

• Stock Recommendation for Students Using Technical Analysis and LSTM-Based Forecasting

  Dini Nurmalasari , Yessi Alfani, Heri R Yuliantoro, Yuli Fitrisia

  111-128

  15-04-2026

• Blood Pressure Monitoring from Photoplethysmography Based for Diabetes Detection

  Syaidatus Syahira Ahmad Tarmizi, Nor Surayahani Suriani, Ezrat Samadi

  129-141

  15-04-2026

• Speaker Recognition Systems: A Review of Machine Learning and Deep Learning Approaches

  Fadhliyatun Farah Mahadi , Rafizah Mohd Hanifa, Shamsul Mohamad, Roszaini Haniffa

  155-169

  15-04-2026

• Non-Destructive Evaluation of Concrete Strength Grades Using Dielectric Permittivity Measurements

  Anderson Ngap Chai Kho, Yi Lung Then, Chee Khoon Ng, Dyg Norkhairunnisa Abang Zaidel, Kok Yeow You

  170-185

  15-04-2026

• IoT-Based Fertiliser Mixing for Precision Farming

  Sri Tulasi Ram Rajalingam, Muhammad Muzakkir Mohd Nadzri, Afandi Ahmad, Mohamad Khairi Ishak

  186-201

  15-04-2026

• SDN Security in 6G: Future Technologies and Research Challenges

  Abdinasir Hirsi, Lukman Audah, Adeeb Salh, Mohammed A Alhartomi, Nan Mad Sahar, Salman Ahmed

  202-214

  15-04-2026

• Development of an Optical Handheld Device and Decision Tree for Mango Ripeness Classification Based on Sweetness Quality

  Muhamad Amir Irfan Roslan, Nur Anida Jumadi, Farah Najidah Noorizan, Muhammad Nazrin Nazri

  215-228

  15-04-2026

• Mitigation of LFOs within Smart Grid Using Adaptive Fuzzy Logic Neural Network control Scheme

  Nadia Zeb, Shamsul Aizam Zulkifli, Muhamad Syazmie Sepeeh, Nedim Tutkun, Noor Hisyam Bin Ibrahim

  229-241

  15-04-2026

• Deep Learning-Based Classification of Anesthesia Depth Using EEG and Bispecral Index

  Nurul Izzati Che Abdul Patah, Julie Roslita Rusli, Izanoordina Ahmad, Balqis Budiman, Husna Hamza, Wan Maziyah Ab. Halim, Sairul Safie, Rohana Sapawi, Sohiful Anuar Bin Zainol Murad, Nor Hidayah Kahar, Mohd Zubir Suboh

  242-253

  15-04-2026

• GIS-Based Investigation of Lightning Activity with Its Meteorological and Topographical Correlates on a 500 kV Transmission Line in Peninsular Malaysia

  Nurzanariah Roslan, Ungku Anisa Ungku Amirulddin, Mohd Zainal Abidin Ab Kadir, Noradlina Abdullah

  254-272

  15-04-2026

• Development of Oil Palm Based Biomass Technology for Renewable Energy Harvesting

  Azuwien Aida Bohari, Emier Nurman Hazeem, Muhammad Rusydi Muhammad Razif, Khalid Aboubakr Hasan Mousay, Mohd Nizam Mohd Talib, Mohd Abdul Talib Mat Yusoh, Mohd Norazysyam Azman

  273-284

  15-04-2026

• Fire Alarm System Alert Via Short Message Service (SMS)

  Muhammad Zulhimi Hussin, Jamaludin Jalani, Jumadi Abdul Sukor, Muhammad Irfan Rahimi, Ramlah Awang, Noorhamizah Mohamed Nasir

  285-301

  15-04-2026

• Effective Study of An Autonomous Hydroponic System Using Solar Energy and IoT Monitoring Technology

  Siti Amely Jumaat, Ahmad Fateh Mohamad Nor, Ansar Jamil, Muhammad Nafis Ismail, Suriana Salimin, Muhammad Shafiq Bin Abdul Rahman

  302-319

  15-04-2026

• Analysis of Emissivity Effects on Subterranean Heat Transfer for Thermoelectric Power Generation

  Khairun Nisa Khamil, Vikneswaran Gopala Krishnan, Azdiana Md Yusop, Mohd Faizul Mohd Sabri, Fatimah Al Zahrah Mohd Saat

  320-331

  15-04-2026

• A Review on Influencing Factors and Suppression Methods of Centrifugal Pump Vibration

  Jia Fu Guo, Abdul Mutalib Leman, DongLi Zhang, JinPing Zhang

  332-348

  15-04-2026

• Development and Performance Evaluation of Machine Learning Model for Fault Diagnosis of Mineral Oil-Filled Transformer Using No-Code Approach

  Chee Ying Chan, Nursyarizal Mohd Nor, Nor Zaihar Yahaya

  349-367

  15-04-2026

• Electrical and Optical Improvement of Gambier Dye Modification to Enhance DSSC Performance

  N. Mohd Azizan, D.G. Saputri, M.K. Ahmad, K.N. Ramli, M.Y. Ahmad

  368-379

  15-04-2026

• Optical Emission Spectroscopy of CO₂ Plasma Produced by CCP-Type Discharge

  Nur Aqilah Saidon, Riyaz Ahmad Mohamed Ali, Nafarizal Nayan, Noor Kamalia Hamed, Zulkifli Azman, Natasya Salsabiila, Herman Asri

  380-389

  15-04-2026

• Estimating Time Since Death: A Forward Chaining-Based Expert System Design

  D.Noveriyanti, E.E Surbakti, R. Winantyo

  390-403

  15-04-2026

• A Bent Fiber Optic with a D-Shaped Structure for Temperature Sensing

  Nazrah Ilyana Sulaiman, Nor Hafizah Ngajikin, Nurfatihah Che Abd Rashid, Muhammad Zakir Md Yassin, Siti Hajar Aminah Ali, Maslina Yaacob, Noran Azizan Cholan

  404-414

  15-04-2026

• Robustness Evaluation of Machine Learning and Deep Learning Models for Patient Adherence Classification under Feature-Homogeneous Clinical Data

  Silfiana Nur Hamida, Wayan Firdaus Mahmudy

  79-92

  18-06-2026

• Effects of Sintering Temperature on the Flexural Strength and Shrinkage of Feldspar Reinforced Clay Composite for the Vitrified Clay Pipe Application

  Noradila Abdul Latif, Nur Farah Atiqah Jamaludin, Sharifah Adzila, Joseph Tan, Lim Siak Hooi

  345-352

  30-12-2024

• A Review on the Effect of Post-Weld Heat Treatment (PWHT) on its Thermal Analysis and Mechanical Properties of Welded Metallic Pipe

  Nurul Shahadah Roslan, Muzzahir Mohmad Hadzir, Iman Fitri Ismail, Mohamad Nur Hidayat Mat, Eliza M. Yusup

  296-313

  17-08-2024

• Numerical Study on Enhancing Photovoltaic Panel Efficiency Through Heat Exchanger Cooling with Al₂O₃ Nanofluid

  Yamunan Manimaran, Abdulhafid M A Elfaghi, Abdoulhdi A. Borhana Omran, Mostafa Abobaker

  1-8

  24-04-2026

• Experimental and Numerical Study of Adding Bed Material in Swirling Gasification Using Palm Cake as Feedstock

  Satawat khakkharo, Muhammad Arsal Cheema, Wasu Suksuwan, Arkom Palamanit, Mohd Faizal Mohideen Batcha, Makatar Wae-hayee

  9-21

  24-04-2026

• Development of An IoT-LoRaWAN Sensor-Enabled Photobioreactor System for Characterizing the Growth of Microalgae

  Mahdzir Jamiaan, Chin Fhong Soon, Kim Seng Chia, Kian Sek Tee, Norshuhaila Mohamed Sunar, Siti Nor Hidayah Arifin, Chris Hend

  22-32

  24-04-2026

• Design and Fabrication of 3D Printed Remotely Operated Vehicles (ROVs) for Shallow Underwater Environmental Monitoring

  Muhammad Zulfauzan Fahmi Che Alias, Herdawatie Abdul Kadir, Nur Nazifa Mod Arsad, Khalid Isa, Mohd Adib Mohammad Razi, Radzi Ambar, Iffan Darwis Mohd Ibrahim

  33-41

  24-04-2026

• Comprehensive Energy Performance Assessment of a Lecturer Building in a Malaysian Public University

  Norfakhira Mohd Nor, Mohd Azahari Razali, Nur Syafiqah Adha Narrudin, Nur Adlin Abu Bakar, Siti Birkha Mohd Ali, Nur Erma Nardiah Nazami, Masataro Suzuki

  42-55

  28-04-2026

• Coupled Reynolds–Mach–Thermal Dynamics in Vortex-Stabilized Meso-Scale Combustors: Implications for Efficiency and Stability

  Azri Hariz Roslan, Mohd Al-Hafiz Mohd Nawi, Mohd Sharizan Md Sarip, Chu Yee Khor , Muhammad Lutfi Abd Latif, Mohammad Azrul Rizal Alias, Mohd Fathurrahman Kamarudin, Hazrin Jahidi Jaafar, Mohd Danish

  68-81

  28-04-2026

• In-vitro Bioactivity Assessment of PLA/Hydroxyapatite Synthesized from Cockle Shell Waste in Simulated Body Fluid

  Nursyazwani Zulkefli, Mohammad Ivan Azis, Shahzulreza Saiful, Eliza M.Yusup

  82-94

  28-04-2026

• Surface Roughness Optimization in Aluminium Alloy Milling: A Taguchi Based Analysis of Dovetail Cutter Parameters and Tool Wear Prediction

  Chan Kian Wui, Saliza Azlina Osman, Agustinus Purna Irawan, Tay Sin Kiat, Shahrul Azmir Osman

  95-111

  28-04-2026

• Corrosion Under Insulation Probability of Failure Prediction Framework Accordance with API 581

  S. F. Yeow, Abdul Rahim Othman, Mazian Mohammad, S. B. Mohammad Agil

  112-125

  28-04-2026

• Effect of Groove Height on Hydraulic Performance of Spiral Corrugated Firefighting Pipe

  Gercham Gan, Normayati Nordin, Mohd Sukri Ramli, Azian Hariri, Akmal Nizam Mohammed Mohammed

  126-140

  28-04-2026

• Computational Analysis of Hyperthermia Therapy on Breast Tumors

  Nur Amani Hanis Roseman, Mohamad Saddam Kamarudin, Ishkrizat` Taib, Ahmad Mubarak Tajul Arifin, Abdul Rahman Abd Majid, Aslam Khan Abdul Azim Khan, Takahisa Yamamoto, Mohd Nizam Mazlan, Awaludin Martin

  141-154

  28-04-2026

• Effects of Photoperiod Fragmentation on Lettuce Yield and Specific Energy Consumption in Indoor Farming Systems

  Mohd Faiz Othman, Muhammad Ikhram A. Wahid, Mohd Faizal Mohideen Batcha, Suzairin Md Seri

  155-166

  28-04-2026

• Evaluation of a Passive Direct Greenhouse Solar Dryer under Varying Load Conditions

  Abdul Rahman, Mohd Suffian Misaran, Chu Chi Ming, Rachel Fran Mansa, Tham Heng Jin, Mohd Adzrie Radzali, Mohd Kamel Wan Ibrahim, Md. Mizanur Rahman

  167-181

  28-04-2026

• Assessment of RBD Palm Oil-in-Water Emulsion to Reduce Dust Exposure and Crystalline Silica in Abrasive Blasting

  Muhammad Ikhwanuddin K. Samsudin, Hanis Zakaria, Muhammad Firdaus Abdul Rahman, Mohd Azham Azmi, Suhaimi Hassan, Noorul Azreen Azis, Ridwan Abdurrahman

  182-194

  28-04-2026

• Performance Evaluation of Diffuser Dampers in HVAC Systems Using Volume-Weighted Average Analysis

  Nur’Amirah Busu, Norasikin Mat Isa, Mohamed Hussein, Azian Hariri, David Shina Adebayo, M.F. Abdul Ghani

  195-212

  28-04-2026

• Biocomposite Headrests Design Criteria Weightage: Voice of Stakeholders via Survey and Analytic Hierarchy Process

  Khairul Azri Azlan, Muhd Ridzuan Mansor, Effendi Mohamad, Teruaki Ito

  1-12

  30-04-2026

• Intelligent System for Automated G-Code Generation: Development and Validation of STEP File Integration in CNC Machining

  Zammeri Abd Rahman, Saiful Bahri Mohamed, Mohd Shahir Kasim, Mohamad Minhat, Razwan Rohimi, Muhammad Abdulrahim Rabbani Md Sharizam, Tengku Mohd Sharir Tengku Sulaiman, Zulkifli Abd Rahman

  13-30

  30-04-2026

• CFD Analysis of Motorcycle Moving on Bridge During Overtaking Under Crosswind Conditions

  Tiong Woei Ting, Izuan Amin Ishak, Mohammad Arafat, Nofrizalidris Darlis, Nur Haziqah Shaharuddin, Ahmad Faiz Mohammad

  31-47

  30-04-2026

• Catalytic Performance of NiO/Eggshell Prepared via Sol-Gel Technique in Pyrolysis of Mixed HDPE and PET

  Muhammad Amir Aqil Mohamad Dzol, Vekes Balasundram, Norazana Ibrahim, Ruzinah Isha, Le Kim Hoang Pham

  48-62

  30-04-2026

• Numerical Investigation of Defect Severity in Double-Slope 16MnR Steel Cracked Pipes with Uniform Corrosion Using the XFEM-Level Set Method

  Houda Salmi, Houda Lifi, Khalid EL Had, Abdelilah Hachim, Amal Lamati

  63-88

  30-04-2026

• Performance Evaluation of a Recyclable Bottle-Blade Overshot Waterwheel for Low-Head Low-Flow Pico Hydropower Applications

  Mohd Farriz Basar, Izzatie Akmal Zulkarnain, Kamaruzzaman Sopian, Dendy Adanta, Carlos Trenado

  99-117

  30-04-2026

• Influence of Heat Treatment on Strain-induced Martensitic Transformation for Type-316 Stainless Steel

  Thong Chung Nguyen, Hang Thi Pham, Hang Thi Nga Nguyen

  135-146

  30-04-2026

• Parametric Analysis and Optimization on Aerodynamic Performance of Optimized Pedestrian Crash Friendly Sedan Front End Profiles

  Afzatul Najwa Nor Azman, Kausalyah Venkatason, Shasthri Sivaguru

  147-165

  30-04-2026

• Enhancing Electrochemical Properties of BSCF-Based Cathode Composite Through Catalyst Addition for Low-Temperature Solid Oxide Fuel Cells

  Umira Asyikin Yusop, Nurul Farhana Abdul Rahman, Wan Nor Anasuhah Wan Yusoff, Nurul Akidah Baharuddin, Tan Kang Huai, Jarot Raharjo, Hamimah Abd.Rahman

  89-98

  30-04-2026

• Effectiveness of Eggshell Waste as Toothpaste Abrasive Agent with Optimal Toothbrushing Parameter

  Shakilla Nur Asimah Mat Hussin, Shahmir Hayyan, Mohd Zulkarnain Mohd Zakri, Ola Barakat Al-Batayneh, Sarliza Yasmin Sanusi

  56-67

  28-04-2026

• Proposed Double Sampling Variable Sampling Interval Coefficient of Variation Chart for Manufacturing

  You Huay Woon, Michael Khoo Boon Chong, Sajal Saha, Yasar Mahmood, Shanyu Chua

  118-134

  30-04-2026

• Numerical Design of a THz Metamaterial Biosensor for Early Skin and Breast Cancer Detection

  Suhail Asghar Qureshi, Zuhairiah Zainal Abidin, Noor Azwan Shairi, Huda A Majid, Hongnian Yu, Nurul Bashirah Ghazali

  142-154

  15-04-2026

• Edge Deployment of Behaviour-Based Smart Home Automation System Using LSTM on Raspberry Pi for Real-Time Electrical Load Control

  Mochamad Susantok, Farhana Ahmad Poad, Ariffuddin Joret, Agus Urip Ari Wibowo, Joni Chang

  424-441

  30-04-2026

• Anomaly Detection in Autonomous Fixed-Wing UAV Agricultural Mapping Missions Using Deep Learning

  Zainal Arifin, Lilik Anifah, I Gusti Putu Asto Buditjahjanto

  50-62

  18-06-2026

• Static Equivalent Seismic Analysis of Omo Sebua Traditional Timber Houses in Nias, Indonesia

  Yosafat Aji Pranata, Tani Frisda, Heri Lumban Tobing

  198-209

  30-04-2026

• Carboxylated Adsorbent from Confiscated Cigarette Tobacco for Methylene Blue Removal

  Saiful Azhar Saad, Khairuddin Md. Isa, Subash Candra Bose Gopinath, Farizul Hafiz Kasim, Naimah Ibrahim, Mohd Aizudin Abd Aziz

  210-226

  30-04-2026

• The Correlation Between Electrical Resistivity Tomography and Borehole Data at a Coastal Semi-Developed Area

  Muhammad Nizam Zakaria, H. Obiya, A. T. S. Azhar, Z. M. N. Hidayat, M. Aziman, J. Amir, I. M. Fakhrurrazi

  243-256

  30-04-2026

• California Bearing Ratio Properties of Peat Soil Stabilized with Crustacean Shell Waste (Chitosan) and Expanded Perlite (EP) Blends

  Zeety Md Yusof, Nurul Aida Asri, Mohamad Afiq Let, Leow Chee Sin, Paulus Pramono Rahardjo

  257-273

  30-04-2026

• Sustainable Urban Waste Management Strategies Based on System Dynamics in Manado City, North Sulawesi, Indonesia

  Hendrik Suriandjo, Alicia Amelia Elizabeth Sinsuw, Chen-Yeon Chu, Sangkertadi, Judy Obet Waani, Verry Lahamendu

  227-242

  30-04-2026

• Boundary Element Analysis of Acoustic Wave Problems in Functionally Graded Materials

  Khaeruddin , Firman , Muh. Nur, Eliza M.Yusup, Mohamad Nur Hidayat Mat, Mohammad Ivan Azis, Shahrul Azmir Osman

  139-156

  18-06-2026

• Predictive Modelling of Stress and Tensile Properties of Oral Dispersible Film Using Artificial Neural Network

  Fetriya Fatihah Nasar, Jamaluddin Mahmud, Noor Fitrah Abu Bakar, Nur Asyikin Ahmad Nazri

  169-181

  18-06-2026

• Smart Biodigester System for Bioenergy Production Using Artificial Neural Network

  Mochammad Junus, Rachmad Saptono, Agnes Medikawati P. E., Mohd Noor

  93-110

  18-06-2026